Sound,Pics & Video Clip of Fluid Motor Custom Headers
Thread Starter
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
Sound,Pics & Video Clip of Fluid Motor Custom Headers
Here you go guys as requested 
, Sorry i started a new thread i didn't know how to edit my last Thread to get the videos on the first post. I should have some updated Dyno numbers tommorrow afternoon and maybe some more pics. ENJOY as i am doing so every time i get in this freakin car haha.
Idle
Drive by to many cops in the area so i let off lol.
Last drive by.
My Exhaust setup as it sits.
Is Custom Fluid Motor Union Longtube headers. (Don't know primary or collector specs so don't want to quote anything)
Primary & secondary cats removed replaced with 3" Stainless mandrel pipes.
Resinator delete replaced with 3" Magnaflow Stainles X Pipe.
Stock AMG Muffler.
Again can't thank the guys at Fluid Motor Union enough for there amazing workmanship,hospitality and most important ther Honesty. If your in the midwest or anywhere in the world at that these guys can get it done no matter what it is you are looking to do.
Heres a few pic's from that night as well My 55 and cousins S4.
, Sorry i started a new thread i didn't know how to edit my last Thread to get the videos on the first post. I should have some updated Dyno numbers tommorrow afternoon and maybe some more pics. ENJOY as i am doing so every time i get in this freakin car haha.Idle
Drive by to many cops in the area so i let off lol.
Last drive by.
My Exhaust setup as it sits.
Is Custom Fluid Motor Union Longtube headers. (Don't know primary or collector specs so don't want to quote anything)
Primary & secondary cats removed replaced with 3" Stainless mandrel pipes.
Resinator delete replaced with 3" Magnaflow Stainles X Pipe.
Stock AMG Muffler.
Again can't thank the guys at Fluid Motor Union enough for there amazing workmanship,hospitality and most important ther Honesty. If your in the midwest or anywhere in the world at that these guys can get it done no matter what it is you are looking to do.
Heres a few pic's from that night as well My 55 and cousins S4.
Last edited by bnzuovr; May 20, 2010 at 02:00 AM.
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
Thanks it sounds so much better in person. As far as the dyno numbers i was there today to retune the car but did'nt get a good file so right now dyno numbers aren't were there suppost to be at.
Haha best whining noise in the world lol
Thank you all very much
Member
Joined: Mar 2007
Posts: 95
Likes: 0
From: PNW
'05 E55 AMG
Oh well, when do you think you'll be able to get a good file? I'm curious to see how they perform against EC's headers.
MBWorld Fanatic!
Joined: Dec 2008
Posts: 2,190
Likes: 35
shrimp boat
Couple questions for you. Are there any drone? How's the noise inside the car? And do you feel any lost of low end torque at all? Thank in advance.
Those are some sick looking headers. PM me the price if you don't mind.
Those are some sick looking headers. PM me the price if you don't mind.
Junior Member
Joined: Oct 2008
Posts: 42
Likes: 0
From: Elgin, IL
something that can use more power
Hey it looks like you are in my neck of the woods. Me and a few buddies are headed to Byron Dragway on Sunday morning. Head up there is you are available. I would love to hear that beast in action. Some of the cars rolling with me on sunday: Stockish Supra, STI, M5 and a 32Ford bucket with a blown monster V8.
Thread Starter
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
Thanks Bruce the guys over at FMU did a wonderful job. I was checkin out a few vids from the cars you did and get inspired with that silver E55 & the Red B/S Clk is no joke sounds wicked as hell.
[QUOTE=Forrest Gump 9;4084025]Couple questions for you. Are there any drone? How's the noise inside the car? And do you feel any lost of low end torque at all? Thank in advance.
No drone at all the exhaust only livens up when its at WOT. Low end torque feels like its right there i don't feel a lose infact it feels stronger low end.
Hey it looks like you are in my neck of the woods. Me and a few buddies are headed to Byron Dragway on Sunday morning. Head up there is you are available. I would love to hear that beast in action. Some of the cars rolling with me on sunday: Stockish Supra, STI, M5 and a 32Ford bucket with a blown monster V8.
Thread Starter
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
Thread Starter
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
Senior Member
Joined: Jan 2009
Posts: 266
Likes: 0
From: Orlando/West Palm Beach, Florida
2005 E55 & 2007 335iC
No, i haven't been to the actual track since the mods 
unfortunately i am having a hard time with my job since i just switched company and i am in the "evaluation" period. Money is tight right now 
but my headers are not Longtubes, but i do plan to just have my local shop delete the 2 cats that connect to the shorties. They don't seem like an extreme bend. But I do feel that 19" wheels really kill the speed, have you ever noticed the brabus wheels vs stock wheels?
unfortunately i am having a hard time with my job since i just switched company and i am in the "evaluation" period. Money is tight right now but my headers are not Longtubes, but i do plan to just have my local shop delete the 2 cats that connect to the shorties. They don't seem like an extreme bend. But I do feel that 19" wheels really kill the speed, have you ever noticed the brabus wheels vs stock wheels?
Member
Joined: Jan 2010
Posts: 206
Likes: 2
From: Winter Park, FL
S63 AMG, E55 AMG,C Class AMG CLK55 AMG, Jeep Rubicon
Fluid Motor Union handled my exhaust as well and I like it very much.
Stock mufflers with nothing but pipes to the exhaust manifold.
Im just waiting for some LTH to go with my pulley in the garage.
Stock mufflers with nothing but pipes to the exhaust manifold.
Im just waiting for some LTH to go with my pulley in the garage.
Thread Starter
MBWorld Fanatic!
Joined: Jun 2007
Posts: 1,378
Likes: 4
From: Bloomingdale,IL
2004 W211 E55K, GL550
No, i haven't been to the actual track since the mods unfortunately i am having a hard time with my job since i just switched company and i am in the "evaluation" period. Money is tight right now but my headers are not Longtubes, but i do plan to just have my local shop delete the 2 cats that connect to the shorties. They don't seem like an extreme bend. But I do feel that 19" wheels really kill the speed, have you ever noticed the brabus wheels vs stock wheels?
unfortunately i am having a hard time with my job since i just switched company and i am in the "evaluation" period. Money is tight right now but my headers are not Longtubes, but i do plan to just have my local shop delete the 2 cats that connect to the shorties. They don't seem like an extreme bend. But I do feel that 19" wheels really kill the speed, have you ever noticed the brabus wheels vs stock wheels?
