EuroTek Diffuser fitted!!!
#1
Member
Thread Starter
Join Date: Oct 2009
Location: UK ENGLAND
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
CL63, 997 TT, M3 DCT
EuroTek Diffuser fitted!!!
Hi Guys,
after a looong wait, got my eurotec CF diffuser this weekend, just fitted it yesterday!
Great finish, amazing fit and very very good quality, highly recommended
Was gonna get a different style one (cheaper) from ebay etc, but after seeing the Godfathers one I was sure it was the best one...
Pics included, hope you enjoy.
The next mod im doing it on my tailpipes...Gonna chop them off, get them machine buff'd and welded back on, but a bit futher out just so you can see the AMG on the tips, as they are now covered, what you guys think?
Has it been done before- if so any pics?
I did wanna change my tips altogether but im finding it impossible to source some!
Awaiting feedback!!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
my fingers are twitching to do the next mod now.....only thing is I dont know what!!!!
after a looong wait, got my eurotec CF diffuser this weekend, just fitted it yesterday!
Great finish, amazing fit and very very good quality, highly recommended
Was gonna get a different style one (cheaper) from ebay etc, but after seeing the Godfathers one I was sure it was the best one...
Pics included, hope you enjoy.
The next mod im doing it on my tailpipes...Gonna chop them off, get them machine buff'd and welded back on, but a bit futher out just so you can see the AMG on the tips, as they are now covered, what you guys think?
Has it been done before- if so any pics?
I did wanna change my tips altogether but im finding it impossible to source some!
Awaiting feedback!!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
my fingers are twitching to do the next mod now.....only thing is I dont know what!!!!
#4
Super Member
...and...is that plastic oem butt just held on by adhesive? screws?
I'm probably diving into an install tonight (if the parts arrive)
Thanks! Looks great too!
I'm probably diving into an install tonight (if the parts arrive)
Thanks! Looks great too!
#5
MBWorld Fanatic!
Join Date: Oct 2006
Location: merryland
Posts: 1,603
Likes: 0
Received 0 Likes
on
0 Posts
cornfed gtr and m3
I can't tell if it just the angle of the picture or what, but the diffuser looks like it is flush on the left side and and then bulges out on the right side.
Trending Topics
#12
Registered User
MINE DOES !! Damn Euroteck needs to do another group buy , there are alot of peeps that are looking for this and i have had maybe half a dozen ask me to unload mine if i decide not to keep the car upon lease maturity .
Sad thing is the 2 way tape didnt work for **** so we had to epoxy the biotch! parting this out would be a big fail
Sad thing is the 2 way tape didnt work for **** so we had to epoxy the biotch! parting this out would be a big fail
#16
MBWorld Fanatic!
MINE DOES !! Damn Euroteck needs to do another group buy , there are alot of peeps that are looking for this and i have had maybe half a dozen ask me to unload mine if i decide not to keep the car upon lease maturity .
Sad thing is the 2 way tape didnt work for **** so we had to epoxy the biotch! parting this out would be a big fail
Sad thing is the 2 way tape didnt work for **** so we had to epoxy the biotch! parting this out would be a big fail
#17
Registered User
Check my album on my page u might be able to blow one or two up for close up . It does have 2 screws on the ends that hold it into place but the epoxy made for a better job than the stick tape IMHO .
#18
Super Member
I'm getting ready to install my diffuser tonight and just went to Home Depot to get a few things...
The only thing I came up short on were screws. What length and type did you use on yours?
The only thing I came up short on were screws. What length and type did you use on yours?
#19
MBWorld Fanatic!
Join Date: Nov 2006
Location: California, USA
Posts: 9,137
Likes: 0
Received 4 Likes
on
4 Posts
E63 P30, CL500 Sport
The E63 diffuser was created as a limited edition item for two years. The next production won't be until end of July 2011 (if it ever happens, as they are considering not producing it again at all actually since the new E-Class is out).
#21
MBWorld Fanatic!
#22
Member
Thread Starter
Join Date: Oct 2009
Location: UK ENGLAND
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
CL63, 997 TT, M3 DCT
guys sorry for late reply!!
The spolier is a Brabus one, took me AGES to find, the best looking one IMO
Any ideas about the tailpipes, sounds like a good idea or not?
The spolier is a Brabus one, took me AGES to find, the best looking one IMO
Any ideas about the tailpipes, sounds like a good idea or not?