600 hp + $$?
MBWorld Fanatic!
Joined: Jun 2006
Posts: 2,359
Likes: 2
From: California
06 C55, 09 E350
Kleeman
55-K4 kit for S/C 55 AMG cars
The 55-K4 kit provides the best mix of high power, reliability and value-for-money, and raises power up to 620 HP and 900 Nm.
-------------------------
NOTE: In order for us to upgrade the ECU, you must remove it from the car and send it to us.
Estimated delivery time 3-7 Day(s) In stock
Price ex. VAT: 6.995,00 EUR
55-K4 kit for S/C 55 AMG cars
The 55-K4 kit provides the best mix of high power, reliability and value-for-money, and raises power up to 620 HP and 900 Nm.
-------------------------
NOTE: In order for us to upgrade the ECU, you must remove it from the car and send it to us.
Estimated delivery time 3-7 Day(s) In stock
Price ex. VAT: 6.995,00 EUR
Super Moderator
Joined: Jul 2003
Posts: 11,664
Likes: 3
From: SoCal
W221
Now a days, this is prolly all you need...
ECU/Pulley
Headers
Throttle body
It would also be highly recommended that you upgrade your intercooler pump and a larger heat exchanger.
Good luck
ECU/Pulley
Headers
Throttle body
It would also be highly recommended that you upgrade your intercooler pump and a larger heat exchanger.
Good luck
MBWorld Fanatic!
Joined: Nov 2004
Posts: 6,697
Likes: 381
2005 E55
168/72mm pulley
shorty headers
H/E
tune
that is good for 500whp add race gas and meth you can make 550whp on a 168 pulley
Iv seen it!!!!
edit...that was with renntech airbox and 82mm tb also
shorty headers
H/E
tune
that is good for 500whp add race gas and meth you can make 550whp on a 168 pulley
Iv seen it!!!!
edit...that was with renntech airbox and 82mm tb also
Last edited by skratch77; Jul 6, 2010 at 08:16 PM.
Super Member
Joined: Aug 2006
Posts: 856
Likes: 0
From: palm beach
CLS55 & CL CK60
600 to the CRANK is not too expensive and has been done many times over by forum members. expect 80 from a pulley and good tune ($1500 to $2000) and another 30 from headers ($1500 to $3000) and cooling mods ($750) and you should be able to reach your goals for approx $5 to $6k. if you can find used parts u may save some $$.
getting 600 to the WHEEL is another story and a few more bucks...the first 100 ponies come easy. the next 100 are difficult...
getting 600 to the WHEEL is another story and a few more bucks...the first 100 ponies come easy. the next 100 are difficult...
Super Member
Joined: Oct 2009
Posts: 923
Likes: 0
From: Jacksonville, Florida
2006 E55 AMG --old cars -- E39 M5, 2.7tt Audi S4, E36 M3 **Ducati 996, 748
couldn't say it any better!! I know i have over 600crank and my mods were cheap -- I picked up used parts -- when everyone upgraded to the newer pullies and affordable headers... i gladly scooped up their old stuff.
i think i go all my stuff for around $2000 -
good luck !!
i think i go all my stuff for around $2000 -
good luck !!
600 to the CRANK is not too expensive and has been done many times over by forum members. expect 80 from a pulley and good tune ($1500 to $2000) and another 30 from headers ($1500 to $3000) and cooling mods ($750) and you should be able to reach your goals for approx $5 to $6k. if you can find used parts u may save some $$.
getting 600 to the WHEEL is another story and a few more bucks...the first 100 ponies come easy. the next 100 are difficult...
getting 600 to the WHEEL is another story and a few more bucks...the first 100 ponies come easy. the next 100 are difficult...
