Economical Heat Exchanger
#1
MBWorld Fanatic!
Thread Starter
Economical Heat Exchanger
![](http://i760.photobucket.com/albums/xx245/lowprofile_photos/Delaware/Random/177-1.jpg)
![](http://i760.photobucket.com/albums/xx245/lowprofile_photos/Delaware/Random/175.jpg)
1.8 Liter capacity
4010 square inches of cooling fin area
Tube and fin design
$220
Appears very similar to these photos: https://mbworld.org/forums/w211-amg/...exchanger.html
#2
MBWorld Fanatic!
Thread Starter
#5
MBWorld Fanatic!
Thread Starter
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
Skratch's is also the same with slightly different mounts.
I'm all in for paying for cost of R&D. But when the R&D consist of repackaging, then pass on the savings too.
Trending Topics
#11
MBWorld Fanatic!
Thread Starter
Sneakneon, I can't thank you enough for having the insight to download the picture I linked showing the exact same heat exchanger. Funny thing that someone would sabotaged the picture only after this thread became public. Odder still, is that they repaired the link only after you posted the same picture. If you "right click" the picture of the eurocharged h/e in the thread I linked, under "properties" you can see that it was created and modified today. Who would do such a thing???
Jake.... thanks for dropping in. Not sure what the mechanical drawing is of but I was under the impression that EC sells a dual pass h/e not a single like in the drawing? Anyway, so the new h/e is made by C&R. Well, who made the older versions that we are looking at with the EC logo on it? The specs are the same as EC provides on their website under "details."
Here are the specs provided by the seller. There is also some info on the Frozen Boost model.
http://zzperformance.com/cobalt_ion/articles1.php?id=65
Do moderators keep track of people modifying non-offensive pictures?
Jake.... thanks for dropping in. Not sure what the mechanical drawing is of but I was under the impression that EC sells a dual pass h/e not a single like in the drawing? Anyway, so the new h/e is made by C&R. Well, who made the older versions that we are looking at with the EC logo on it? The specs are the same as EC provides on their website under "details."
Here are the specs provided by the seller. There is also some info on the Frozen Boost model.
http://zzperformance.com/cobalt_ion/articles1.php?id=65
Do moderators keep track of people modifying non-offensive pictures?
#12
Good 'ole ZZP, I remember them from my GTP modding days. Many old Grand Prix buddies of mine including a couple running low to mid 12's bought most of their mods from ZZP. Good find and comparison.
#16
I tried to call them to ask if the mounting tabs are like shown. All I got was voicemail. Until I get verification, I'm holding off on the zzperfomance H/E. Leaning towards the H/E from Frozenboost now.
#17
Senior Member
Do you think there is enough room to fit the 3.5 inch frozen boost core or is the 2 inch thick all that will fit.
http://www.frozenboost.com/product_i...0b4fee25778e3a
http://www.frozenboost.com/product_i...0b4fee25778e3a
#18
MBWorld Fanatic!
Thread Starter
#19
hi,
i lost the power in my 03 e55 amg when ever i acc a little hard, step on the gas a bit even without a down shift in gear the power cuts and somehting like a putting noise occurs
is my heat exchange fuked or is it something else thats wrong?
thanks
i lost the power in my 03 e55 amg when ever i acc a little hard, step on the gas a bit even without a down shift in gear the power cuts and somehting like a putting noise occurs
is my heat exchange fuked or is it something else thats wrong?
thanks
#20
Super Member
Join Date: Apr 2009
Location: North Carolina
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG
However, it's your I/C pump. Replace it with a Johnson CM30.
#22
Super Member
Do you think there is enough room to fit the 3.5 inch frozen boost core or is the 2 inch thick all that will fit.
http://www.frozenboost.com/product_i...0b4fee25778e3a
http://www.frozenboost.com/product_i...0b4fee25778e3a
#25
Banned