I must be retarded!
Trending Topics
The Best of Mercedes & AMG
I'm pretty sure a conversion is possible but that you have to use a different loom.
With mine, what you are describing just happens automatically, as soon as you press MAP
With mine, what you are describing just happens automatically, as soon as you press MAP
Hopefully someone can chime in with how we can change the settings to allow us to just pull up a map.
FWIW, you can always pick a destination and then cancel route guidance. I'm pretty sure it leaves it up.
I'm in a 2005 BTW.




Hopefully someone can chime in with how we can change the settings to allow us to just pull up a map.
FWIW, you can always pick a destination and then cancel route guidance. I'm pretty sure it leaves it up.
I'm in a 2005 BTW.
Maybe it has something to do with the COMAND mode that I'm in? I swapped out my logo for the AMG one. Seems like before that my "MAP" button worked.

Hit Home
Hit the same button for Home again.
Gives you Circle+Map.
I'm still irritated that my MAP button doesn't work.
But that's not the point of this thread. It's to figure out why MB gave us a button labeled "MAP" that doesn't have a function in our cars.

Tell me more about this SAMRT phone!
http://m.www.mbworld.org/forums/showthread.php?t=373702
- Turn ignition on and power ON the head unit
- Press and hold the key combination 5+3+7 in this sequence for about 8 seconds to access variants menu
- Scroll up or down and select correct head unit variant, press OK to confirm
- Press the “Keybrd” soft key for the list of possible keyboard types
- Scroll up or down and select the correct head unit Keyboard
- Upon correcting the variant and keyboard settings, turn ignition off and ensure MOST and CAN asleep
- Turn ignition ON and check functionality of all keys using different applications
And I thought My 2006 Navigation really sucked. What you guys are describing is much worse.....
Went in to the engineering menu or whatnot by hitting 5-3-7 when the radio was playing and holding it.
Hit button in upper left associated with "Keyboard."
Changed it from "Developer Mode" to W211AMGUSA or whatever corresponds to us [it will be obvious]
Hit the button associated with "Back" in the lower right.
Make sure W211AMG is selected if you want to retain your AMG startup screen.
Let car reset itself after turning the car off for like 5 minutes.
I've now got a working Map button.


