W211 AMG Discuss the W211 AMG's such as the E55 and the E63

Tuning software for E55 or S55?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 29, 2011 | 01:12 AM
  #1  
Rob Raymer's Avatar
Thread Starter
Newbie
 
Joined: Apr 2011
Posts: 10
Likes: 0
C5 Corvette
Question Tuning software for E55 or S55?

I will be purchasing either an E55 or S55 (2003-2005) within the next week I hope. I plan to do some basic mods to it, pulley, exhaust, etc. But I would like to know where I can buy software to tune it myself? I'm sure there were a lot of gasp's when I said "tune it myself", and I understand. But I actually dyno tune cars for a living. GM, Ford, Dodge, Imports, etc., with countless different types of software. I've been tuning since 1989, so I'm not scared of it.

While I'm asking questions, any suggestion as to which car I should buy? E55 or S55? And why?? (aside from the S55 being heavier and maybe not as "sporty" looking)

Thanks in advance!!
-Rob Raymer
Reply
Old Apr 29, 2011 | 12:47 PM
  #2  
tbal's Avatar
MBWorld Fanatic!
 
Joined: Sep 2008
Posts: 3,575
Likes: 8
From: BC
Haters crazy
Don't know about tuning yourself. But companies like Eurocharged, Kleeman, Renntech, OE tuning provide tuning/tunes for these cars.
Reply
Old May 26, 2011 | 05:04 PM
  #3  
PACougar's Avatar
MBWorld Fanatic!
 
Joined: May 2011
Posts: 1,109
Likes: 20
From: Las Vegas, NV
1000Hp Diesel Trucks, 2019 E63s
I'm in the same boat! I'm picking up a E55 in a couple of weeks and would like to tune it myself. I have no interest in letting someone else touch my car. I'd love to know if there is any software out there for tuning.
Reply
Old May 26, 2011 | 05:08 PM
  #4  
Jakpro1's Avatar
MBWorld Fanatic!
 
Joined: Jan 2004
Posts: 7,092
Likes: 13
From: Salt Lake City (but not Morm)
2003 E55 & 2014 GL550
Wecome to the party. ZERO do it yourself programming software on the market like hptuner for CTSVs.

If you wanna study software programming, you could do it on Winols but first would have to put your ECU on a bench, remove the chip and read it. Then sift through the hundreds of maps that are all in German.

Its the hell we just have to live with being AMG owners.

Eurocharged, Renntech, Kleemann, and OEtuning are the hot tuners right now. Gonna have to go to them or nothing.
Reply
Old May 27, 2011 | 12:36 AM
  #5  
PACougar's Avatar
MBWorld Fanatic!
 
Joined: May 2011
Posts: 1,109
Likes: 20
From: Las Vegas, NV
1000Hp Diesel Trucks, 2019 E63s
Do you know if anyone has tried a complete piggy back setup. Obviously the down sides are you can't change ecu specific stuff, but you should be able to do good job getting the advance and AFR working right for a given setup.
Reply
Old May 27, 2011 | 04:37 AM
  #6  
ASP's Avatar
ASP
Senior Member
 
Joined: Dec 2008
Posts: 397
Likes: 7
From: San Francisco
2016 Freightliner "daily driver"
I am in the bay area if you guys need help with the tunes and hardware, otherwise Jerry from eurocharged can ship you guys a flash tool to use and send back. hope this helps
Reply
Old May 27, 2011 | 11:23 AM
  #7  
MTLdude's Avatar
Member
 
Joined: Jan 2011
Posts: 95
Likes: 0
From: Montreal
2005 CLK 55 AMG
I did a lot of hp tuners with my truck but nothing in term of that for the amg...I went with Eurocharged and the cable that they ship. They remote tune the car and that's it.
Reply
Old May 28, 2011 | 03:38 AM
  #8  
PACougar's Avatar
MBWorld Fanatic!
 
Joined: May 2011
Posts: 1,109
Likes: 20
From: Las Vegas, NV
1000Hp Diesel Trucks, 2019 E63s
I'm probably going to wire in an AEM piggy back system. Do you guys know if anyone else has used one on a E55?
Reply
Old May 28, 2011 | 04:24 AM
  #9  
tbal's Avatar
MBWorld Fanatic!
 
Joined: Sep 2008
Posts: 3,575
Likes: 8
From: BC
Haters crazy
Aem???
Reply
Old May 28, 2011 | 09:13 PM
  #10  
PACougar's Avatar
MBWorld Fanatic!
 
Joined: May 2011
Posts: 1,109
Likes: 20
From: Las Vegas, NV
1000Hp Diesel Trucks, 2019 E63s
www.aempower.com They make a lot of plug and play import electronics, but they also make some universal stuff as well. I've use they're stuff before and it works very well. I'd still prefer being able to reprogram the factory computer myself, but I'll settle for less if I have to.
Reply
Old May 28, 2011 | 10:16 PM
  #11  
Yacht Master's Avatar
MBWorld Fanatic!
 
Joined: Oct 2006
Posts: 3,642
Likes: 13
From: Caribbean/Florida/Colorado
E-ZGO 53hp., 1999 E 430 sport, 2004 E 55, 2008 Tahoe LTZ on 24"s
Welcome to ME motronic 2.8
Our cast pistons have little forgiveness.
Reply
Old May 28, 2011 | 10:45 PM
  #12  
PACougar's Avatar
MBWorld Fanatic!
 
Joined: May 2011
Posts: 1,109
Likes: 20
From: Las Vegas, NV
1000Hp Diesel Trucks, 2019 E63s
I'm not to worried about the pistons as long as you can monitor AFR with a wide band and knock, anyone with tuning experience can keep an engine alive. I'm trying to avoid using a standalone, but I will if I have to. If anyone else has ran other setups, I'd love to here from them.
Reply
Old May 31, 2011 | 12:13 AM
  #13  
AllGoNShow's Avatar
Junior Member
 
Joined: Jul 2008
Posts: 27
Likes: 0
Various....
Slow help from Eurocharged on the tune I'm helping with, 3rd tune and still having some issues. Renntech has always been bang on for me before, never tried Kleeman or OE Tuning. Would also be interested in the software to tune if available but I have been hunting with no luck.

Last edited by AllGoNShow; May 31, 2011 at 12:17 AM.
Reply
Old May 31, 2011 | 01:39 AM
  #14  
ASP's Avatar
ASP
Senior Member
 
Joined: Dec 2008
Posts: 397
Likes: 7
From: San Francisco
2016 Freightliner "daily driver"
Originally Posted by AllGoNShow
Slow help from Eurocharged on the tune I'm helping with, 3rd tune and still having some issues. Renntech has always been bang on for me before, never tried Kleeman or OE Tuning. Would also be interested in the software to tune if available but I have been hunting with no luck.
This is really strange, as I've had my car tuned by eurocharged 5-6 times total with every addition of parts to my car. Every tune was spot on and have never had any delays, hope everything works out as well for you as it did for me.
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:37 AM.