TB shaft grind, and now code P0507
#26
Senior Member
Join Date: Feb 2009
Location: Germany
Posts: 278
Received 0 Likes
on
0 Posts
E55 AMG W211 - sold, CLS 500 C219, E63S AMG W212
Sorry ''bump'' :-)
I don't have access to a Star.
If I follow the TB harness down to the back of the engine by the y-pipe and disconnect it.
Should be the engine running?
I don't have access to a Star.
If I follow the TB harness down to the back of the engine by the y-pipe and disconnect it.
Should be the engine running?
Last edited by munich55; 08-25-2011 at 07:45 AM. Reason: .
#28
Junior Member
Join Date: Apr 2013
Location: Sarasota, Florida
Posts: 51
Likes: 0
Received 2 Likes
on
2 Posts
2004 E55 AMG
I know this is an old thread but...
I had a similar P0505 / P0507 after doing the throttle body grind and it turned out to be the fact that I didn't properly torque the surge tanks which I removed and painted at the same time.
I thought it might help someone else to know this.
FYI, Shardul says that proper torque is 20Nm which is about 14.76 foot pounds.
Be careful not to snap, and tighten in a criss-cross pattern.
D-
I thought it might help someone else to know this.
FYI, Shardul says that proper torque is 20Nm which is about 14.76 foot pounds.
Be careful not to snap, and tighten in a criss-cross pattern.
D-