chawkins2001

I am going to call this company tomorrow about whether their kit can be fitted or run on our platform. I will update you guys in the am

http://www.killerchiller.com/

RedBullJnky

let me know what they say. You know I'm trying to do everything at once so if this works. I'll take it. I want 10's toooo! lol

chawkins2001

If this product looks like a go, it could be a major break through. I am keeping my fingers crossed on this one.

urbamworm

Isn't someone running one of these already? It would be useless for at the track though since you can't run your a/c on the track due to it dripping water under the car. Would be good for out on the road though.

Here Click me

GT-ER

Not entirely useless, you can run the A/C in the lanes before you stage and let the water get ice cold and then turn it off and stage the car.

Regardless, I would still prefer top mount intercoolers over this and I think flow is a bigger issue over IAT's.

chawkins2001

Yes, top mounts would be nice but in the process you are going to get bent over and raped. This setup with an efficient trunk mount system would be a deadly combo at the track and on the street with very little money invested.

Hammer Down

Why don't you just pm MBTEK he has already worked out a kit for our cars.

RedBullJnky

hey I spent 5 years in prison and was NEVER bent over and raped. don't plan on starting now. I'll be waiting for results.

urbamworm

That is going to be totally up to the track you run at. I have been told a few time to turn off my a/c (in the staging lanes) because it is dripping and will continue to drip on the track. This happened just this past weekend in fact at a different track than I normally run at. It was like 86* out and humid so I had the a/c running and they came right to me and told me to turn off my a/c.

GT-ER

Bah...they let me do it at my track.

Grip Grip

subscribed.....

loungn14

works well, had one on our texas mile car...

but needs custom work and a shop to install. The pipes they give you are crap.

Bramage

+1 MBTEK and Bassn07 are running this kit. MB can help you out

Bramage

Ps if you search killer chiller here, there is a great write up on the R&D that has gone into the retrofit

beauphus

mbtek did a lot of work on this and has it pretty dialed in. plus he is a good guy and a fellow e55 owner.

Bramage

You may recognize bassn07's name. He holds the E55 record at 10.77.

chawkins2001

Who is this Alan Guy, is he a myth or real person.

Redbulljunky, Holla, your setup goes out today I call dibs on you for any future bar or tailgate brawls. Need a Playa like you on my team when the heat comes around the corner.

Bramage

Alan is Bassn07. He is real. Lives up in Sacramento Ca. We have all been chasing his record for 3 years and surprisingly no one has got there yet. He used to post regularly but I guess he got tired of the BS. Very nice guy and helped me out many times.

chawkins2001

Dane, I am surprised you don't know my humor yet brotha, I know Alan well and speak to him once in a while for advice on certain setups. He is the king. Does anyone know rflow on dragtimes, he has been in the number one spot for years now too.

chawkins2001

Jake, whose product did you use?

cahiil55k

He ran without nitrous and with all seats intact in good DA. I helped him look for his key once at the dragstrip and there were no sneaky petes (or key) to be found. He's a standup guy, as is Scott/MBTEK. Scott did some work on my car once and showed me his custom Killer Chiller setup while I was waiting. Very innovative.

chawkins2001

I plan to speak to mbtek today too, I believe Alan ran Meth on his record breaking run.

loungn14

ordered direct for another platform and custom made the kit.

Bramage

I believe you are correct. E55 should have come with alcohol injection from the factory

lowprofile

I was pretty sure that Alan was running the 180mm pulley without the alcohol injection when he made his record setting pass.

Regardless, everyone just needs to concentrate on their own combination. This is the essence of hotrodding!
There is always more than one way to skin a cat.