Junior Member
Gary, Do you still have E55 front lip? can you PM me the price? Thanks.
In stock. Will message you.
Member
Quote:
Originally Posted by Gary@Suvneer
In stock.
Product = Perfect
Price = Perfect
Packaging = Perfect
Communication = Perfect
Lead-time = Perfect
Fitment = Perfect
Quote:
Price = Perfect
Packaging = Perfect
Communication = Perfect
Lead-time = Perfect
Fitment = Perfect
Thank you for the kind words. You missed something, though.Originally Posted by LNDMISSL
Product = PerfectPrice = Perfect
Packaging = Perfect
Communication = Perfect
Lead-time = Perfect
Fitment = Perfect
The car = perfect
Let me know if you need a set of CF side skirt extension in the future!
Quote:
Originally Posted by danil_karmiev
Wat abou e63 front
CF front lip for the E63 is sold out. More coming around end of Sept. Thanks.
MBWorld Fanatic!
Strigoi
MBWorld Fanatic!
close
- Join DateJan 2010
- LocationRichmond, CA
- Posts:3,249
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2001 E320 Wagon, 2006 LBZ Silverado, 2007 E63 (sold), 2001 E55 (sold)
-
Likes:114
-
Liked:257 Times in 234 Posts
Just sent a PM regarding the E63 lip.
Replied.
MB World Stories
The Best of Mercedes & AMG
Explore1 left for Godhand E63. 5 left for E55 front.
MBWorld Fanatic!
Strigoi
MBWorld Fanatic!
close
- Join DateJan 2010
- LocationRichmond, CA
- Posts:3,249
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2001 E320 Wagon, 2006 LBZ Silverado, 2007 E63 (sold), 2001 E55 (sold)
-
Likes:114
-
Liked:257 Times in 234 Posts
Finally got my Godhand lip installed last weekend. Took about 20 minutes and fits perfectly. Super easy to put on when you have a lift and 2 people. I love it.


AMG Lover, KRK
Member
close
Quote:
I need 2 or 3 lips for E55 shipped to Jeddah - Saudi Arabia.Originally Posted by Gary@Suvneer
1 left for Godhand E63. 5 left for E55 front.
I will message you. Thanks.
W211 E63 GODHAND CARBON FIBER FRONT LIP $280 shipped to lower 48 States.
In stock!!
W211 E63 XY CARBON FIBER FRONT LIP $300 shipped to lower 48 States.
In stock!!
Email me
gary@suvneer.com
In stock!!
W211 E63 XY CARBON FIBER FRONT LIP $300 shipped to lower 48 States.
In stock!!
Email me
gary@suvneer.com
Senior Member
Quote:
Price = Perfect
Packaging = Perfect
Communication = Perfect
Lead-time = Perfect
Fitment = Perfect
How did you install it?Originally Posted by LNDMISSL
Product = PerfectPrice = Perfect
Packaging = Perfect
Communication = Perfect
Lead-time = Perfect
Fitment = Perfect
Newbie
Do you have e55 cf lip in stock? Do you have any vendor in Norcal where I can pickup?
Senior Member
So 3 years ago, I bought the car from E63//AMG and he had this lip on the car
Unfortunately, 2 winters later I ended up clipping it on some snow
I just recently got the lip ordered again and decided to install it today.
The lip seemed like a 95%-99% direct fit. It had few blemishes and finger prints on the inside of the lip, but thankfully the carbon fiber part seemed intact.
I ended up using 3m double sided tape to stick it on the bumper. And then used half a dozen or so self tapping screws to secure it in place. To really get the lip to sit flush with the bumper, you need to kind of press down from the inside of the bottom of the bumper to mold to the lip. Think of it as molding the bumper to the lip, and not trying to bend the lip to couture to the bumper.
Just a few things I noticed. Aligning the bumper is pretty simple. Just make sure the tip of the nose is in the middle, and the ends of the diffuser are symmetrical at the front bumper near the wheel arch.
One thing tho, I recommend taping the 3m tape a little further away from the Carbon Fiber sides. If its too close to the CF sides, you may end up seeing them sticking out when the bumper is on there. A very small thing, but worth noting.
Overall my car is back to where it was. Thanks Gary.
Unfortunately, 2 winters later I ended up clipping it on some snow
I just recently got the lip ordered again and decided to install it today.
The lip seemed like a 95%-99% direct fit. It had few blemishes and finger prints on the inside of the lip, but thankfully the carbon fiber part seemed intact.
I ended up using 3m double sided tape to stick it on the bumper. And then used half a dozen or so self tapping screws to secure it in place. To really get the lip to sit flush with the bumper, you need to kind of press down from the inside of the bottom of the bumper to mold to the lip. Think of it as molding the bumper to the lip, and not trying to bend the lip to couture to the bumper.
Just a few things I noticed. Aligning the bumper is pretty simple. Just make sure the tip of the nose is in the middle, and the ends of the diffuser are symmetrical at the front bumper near the wheel arch.
One thing tho, I recommend taping the 3m tape a little further away from the Carbon Fiber sides. If its too close to the CF sides, you may end up seeing them sticking out when the bumper is on there. A very small thing, but worth noting.
Overall my car is back to where it was. Thanks Gary.
Senior Member
Will the e63 one fit an e350 with AMG body pack? Asking because my mom wants one for her car.
Quote:
It will not.Originally Posted by skylinrcr01
Will the e63 one fit an e350 with AMG body pack? Asking because my mom wants one for her car.
Back in stock!!
Newbie
Gary
any E63 w211 godhand lips available ?
Price shipped to the UK ?
thanks
lee
any E63 w211 godhand lips available ?
Price shipped to the UK ?
thanks
lee
Quote:
Replied.Originally Posted by DogbreathUK
Gary
any E63 w211 godhand lips available ?
Price shipped to the UK ?
thanks
lee
any E63 w211 godhand lips available ?
Price shipped to the UK ?
thanks
lee
All E63 E55 CF front lips are back in stock. Email me gary@suvneer.com
E55 Cf front lips are back in stock.
email me directly gary@suvneer.com
email me directly gary@suvneer.com


