E55 Supercharger anti-slip belt wrap kit
#1
PLATINUM SPONSOR
Thread Starter
E55 Supercharger anti-slip belt wrap kit
Here is a sneak peak at the belt wrap kit. I left some of the parts off and blurred others for now but wanted to show you how much wrap the kit will have. The bottom crank pulley is a 185mm for example. Smooth , quiet but DEADLY with xtra power!!! Oh yeah, very easy install as well.
![](http://i991.photobucket.com/albums/af31/Vitabc/2011-11-05125026-1.jpg)
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#6
Super Member
@exotic-metal55 Is that the same pulley setup you were talking about in another post with interchangeable rings. This one appears to have dowel pins to keep torque off bolts.
Last edited by Roverron; 12-15-2011 at 08:32 AM.
Trending Topics
#12
PLATINUM SPONSOR
Thread Starter
I guess we have the same list, as this was all stuff I had on my car for my 190 mph goal.
So, just now getting to have the parts annodized, machine finish, hardware together and make a few sets for my friends and myself.
NOONE ever wants to make one of anything for some reason. hehe
Sorry, but wanted to show how nice the wrap is and not give away the simplicity and function of the design just yet.
That black ring is just place holder per say and was 185mm. I just stuck two bolts in it , so I could get a straight on shot, while motor was out.
It will be much easier and thanks!
Soon, just doing some cycle test on the actuator springs. The rest is complete and will go into production, once spring test are complete.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
@exotic-metal55 Is that the same pulley setup you were talking about in another post with interchangeable rings. This one appears to have dowel pins to keep torque off bolts.
Soon, just doing some cycle test on the actuator springs. The rest is complete and will go into production, once spring test are complete.
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#18
MBWorld Fanatic!
Join Date: Mar 2011
Location: The Granite State
Posts: 1,835
Likes: 0
Received 12 Likes
on
8 Posts
.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
A wrap kit fits within my own definition of "acceptable mods", so I'd be willing to install one on my grandpa-mobile.
To bad they can't make a version that sounds like a Pete Jackson gear drive, eh?
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
-G
#19
PLATINUM SPONSOR
Thread Starter
I sure hate all that black belt waste all over the front of my engine!! Way to much slip! Shardul wore the green off his HD green belt quick! First time I had seen that before.
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#22
PLATINUM SPONSOR
Thread Starter
I tested kit for wrap , fit and durability on my car but it was a rough version. Sent everything to machine shop to be machine finished , quoted and anodized. That is all i know right now but hope to know more, as soon as everyone gets back to work!
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#25
MBWorld Fanatic!
Join Date: Oct 2009
Location: Southern California
Posts: 2,825
Likes: 0
Received 16 Likes
on
11 Posts
E55 w/ goods, Z32 Project underway
Yep, this is going to get good really quick. ![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
EDIT: Spammer had his nutz chopped off in record time it appears.
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
Last edited by pearlpower; 05-25-2012 at 12:02 AM.