aghakauve

Last week I was fortunate enough to install a protype smaller s/c clutch assembly on my car. I drove the car for a week checking my boost daily. I saw a 1.5 to 2 psi increase. This is pulley and clutch assembly is 1lbs lighter than the stock assembly made by UPD. Keep in mind my car is stock with the exception of a heat exchanger, pump and secondary/resonator delete. Jerry from Eurocharged was kind enough to tune the car yesterday before I took it to the 1/4 track.

Here is the dyno sheet


Here is the 1/4 mile time


Here is the video
http://www.youtube.com/watch?v=SLVPH...snSLCyyHccWg_T

SterlingE55

RedBullJnky

Very nice!

keith954

Awesome

urbamworm

Were you on regular street tires or have drag radials?

Edit: nevermind, remembered from the other thread that someone picked up drag radials and a spare set of stock wheels so went back and looked and it was you.

Get some headers on that baby and really get her ripping!

sales@eurocharged.com

She's a beast! That SC pulley is awesome!!! Good job guys!

shardul

iTrader: (1)

Thanks for spending the time to fine tune the car!

55fanatic

So how big is the pulley? I'm thinking when I finally get my car I'm going to go with a smaller pulley and what looks to be your list of mods

AKnight55

So would a smaller s/c pulley and larger crank pulley be too much boost or what?

DVC

Very nice!

Do you have the belt wrap kit installed?

Is the clutch engagement smooth?

shardul

iTrader: (1)

depends on what size crank pulley you have. i think 175 or 180 would be optimal. from what i understand Kauve is see about 12 to 13 psi of boost with a stock crank pulley.

urbamworm

That question has variables, there are different sizes of crank pulleys. Running a 168 crank pulley and this supercharger pulley isn't gonna make you boost any higher than the guys running 185, 190, 195 crank pulleys and the big pulley guys would be putting out more boost.

Hammer Down

I would love to see this on car with a 185 or 190 pulley pushing lets say 15lbs of boost, so in theory what would the boost be now?

shardul

iTrader: (1)

Probably over 16psi.

55fanatic

What size pulley is this?

FinanceMike

Been waiting for a while to see this. Hopefully production starts soon!

How does it drive around town? Noticeable power increase? What are your driving impressions thus far?

shardul

iTrader: (1)

I need to get one of these on my car

aghakauve

I do not have a belt wrap kit.

The clutch engagement is extremely smooth! The throttle response is great you instantly feel the boost!

HadiLaw

Just went for a ride with Kevin. The car feels nice and pulls harder than my car did with my first 180mm and tune when I ran 11.87. Nice run Kevin.

DVC

That alone makes it worth it! Thanks for the reply.

Hammer Down

+1

BenzoDoc

Respect. Was unaware you were running this

aghakauve

Thank you soo much Jerry for taking the time to tune my car! I love it!!!!

Not sure how big it is!

jay_55

thats good power............

jay_55

+1

but from where