tbal

More pix please!!! 315 sounds too big to fit?? 305 look iffy...

lm7

Will have more pics this weekend. I read a bunch of threads stating not a chance we could go wider than 295 so i did that but there was still plenty of space when i ran the hankooks. We test fit the 305 and it was close but fit with no work, and 315 even closer and it fits like a glove with a light bit of fender rolling.

tbal

more pix please! Wanna see the shot from rear, stance must be stupid sick

What's the offset/width on the rims

lm7

20x9 +25 front
20x10.5 +45 rear (via starting with off the shelf +42 from vossen and shaving it 3mm)

more pics this weekend and will make new thread... The fit may be a bit aggresive for most but I'm really happy with the results. Anyone in the bay area who needs a source on wheels hit up california wheels in san jose, they fitted this setup for me. We've done 4 sets with them this past year and each time they have come through.

lm7

Yeah there is a ton of clearance in the inner wheel well, things get close against the body fender line and bumper. No rubbing in sport 2, ride qualty is no different than my cv3's on Hankook 295s. I havent really done any spirited cornering yet but dont expect any issues. I live in the SF bay area (roads suck!) and this is my daily driver for my 120mi round trip commute.

pnoyworx

Sorry I actually deleted that message, because I was wrong about more aggressive, sine cutting 3mm is actually brining the rim in. But yes AGGRESSIVE on 315 is the right word. Please do update us on the ride, such as cornering and full load if you get a chance. I have kids I haul around, and it is also my daily, so full trunk with kids or adult feedback would be nice on your own time that is. Thanks

lm7

Yeah we needed to pull it in, I dont want to mislead anyone the fit is tight but it fits barely . the fronts are actually more aggressive than my old cv3 setup so they are pushed out which worked out well as I didnt like the slight sunken in look. Will give you an update on load, cornering etc.

tbal

Bro you think a 305 is doable on my 10.5 et38?, 295s sit pretty flush, not heck of a lot room it seems...

Sir-Boost-a-Lot

iTrader: (1)

Who added the extra 3mm of offset?

Denroll

Those look appropriately meaty. I want to do that, maybe with a set of 19"s.

pnoyworx

no one added. By shaving of the back of the rim you raise your offset. By adding spacers you lower the offset.

Stuntman

someone help me find more info about this truck lol please

Denroll

Thread necromanced!

But, I just ordered a set of 20" Verde Axis V99 with 10.5" wide rear wheels in a 42 offset and I will be trying to fit a set of 305s back there.

chiromikey

Looking forward to your update. What are you going to run up front? Anyone try running 265's?

Denroll

I was planning on 255s, but I'd run 265s if I knew they would fit.

Toadster

you really have to see the tread width, all tires are not the same size

the Hankook 285s were smaller than my PSS 265s

viren.89

+1

I have Conti Extreme contact DW Tuned. 275's and they are wider than some

285's out there.

55fanatic

I run 295 Hankooks cause they were wider then other 285s but smaller than most 295s, they fit with out issue on my 9.5" Forgestars

TTE55

Exactly! I had 305's fit and tried a 315. The only way it would work on a w211 is shaving the center hub on the wheel. IMO that is not a safe thing to do.

Need4Speed

normally we run a 285/25 but I know a 295/25 can work as well

Enigma94

This^^^

Hankooks are really narrow for the actual width numbers. I'd say by at least 20. A 255 on the back on my c55 looked more like a 235. Definitely check the tread widths to make sure you don't get something too wide or narrow.

210e55

Ive been running those wheels since they came out. 295 25 20 fit on back perfectly with that offset. No rub and I'm lowered pretty aggressive. In fact, I'm almost sure you would be able to do 305. When my 295's wear out I'll be moving to 305's myself.

210e55

And yes, mine are Hankooks

Denroll

Pics?

210e55

here you go...