Best radar/laser jammer to buy?
#27
MBWorld Fanatic!
#28
MBWorld Fanatic!
Join Date: Dec 2006
Location: Florida-Germany-New York
Posts: 1,123
Likes: 0
Received 30 Likes
on
25 Posts
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
Works perfectly as installed. Laser beam width at 1000' is at a minimum 3' and they always aim for the headlights or front license plate (if you have one). Those fancy computer designed, expensive projectors we have are great reflectors, but the transceivers are always well within 3' of the headlamps and the scatter is all over the place.
Last edited by AgSilver; 09-22-2012 at 01:33 PM.
#29
They are too low. There is no benefit placing 4 there vs placing two there. There is a problem with some of the new Blinder HP-905s. When using three or four heads plugged into one CPU, vs LIDAR guns that operate at 125pps those are the LTi ultralyte series and the LTI Marksman, get significant punch throughs. When using two heads this doesn't happen. Blinder is currently trying to remedy this issue. http://www.radardetectorforum.org/sh...ad.php?t=14156
You should get your setup tested.
You should get your setup tested.
#30
MBWorld Fanatic!
They are too low. There is no benefit placing 4 there vs placing two there. There is a problem with some of the new Blinder HP-905s. When using three or four heads plugged into one CPU, vs LIDAR guns that operate at 125pps those are the LTi ultralyte series and the LTI Marksman, get significant punch throughs. When using two heads this doesn't happen. Blinder is currently trying to remedy this issue. http://www.radardetectorforum.org/sh...ad.php?t=14156
You should get your setup tested.
You should get your setup tested.
#32
MBWorld Fanatic!
Join Date: Dec 2006
Location: Florida-Germany-New York
Posts: 1,123
Likes: 0
Received 30 Likes
on
25 Posts
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
They are too low. There is no benefit placing 4 there vs placing two there. There is a problem with some of the new Blinder HP-905s. When using three or four heads plugged into one CPU, vs LIDAR guns that operate at 125pps those are the LTi ultralyte series and the LTI Marksman, get significant punch throughs. When using two heads this doesn't happen. Blinder is currently trying to remedy this issue. http://www.radardetectorforum.org/sh...ad.php?t=14156
You should get your setup tested.
You should get your setup tested.
#33
MBWorld Fanatic!
KeepRt - I signed up for the radar site you suggested, but cannot post there yet...
I ordered the dual hp-905, but now am wondering if I should have gone with LI dual. Does the LI dual protect against all LIDAR ? Where is the an unbiased review ? How could I get my setup tested to validate how good it is ?
I ordered the dual hp-905, but now am wondering if I should have gone with LI dual. Does the LI dual protect against all LIDAR ? Where is the an unbiased review ? How could I get my setup tested to validate how good it is ?
#34
MBWorld Fanatic!
Can someone please post pictures of the front sensors installed on the e class ? I am having a hard time getting the units mounted and perfectly true and level. Thanks
#35
Super Member
Join Date: Apr 2012
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
Blown 208 55 amg, 211 55 amg
yes i know old post but i had to revive it.
I rock a jammer no complaints I love it saved me countless times, probably will buy a valentine one to add to the mix this year just because they are insane i love them...
Mine are mounted behind the grille on my heat exchanger its dark outside otherwise id go take some pictures
#37
Just buy directly from them... $400 plus shipping. https://store.valentine1.com/store/
#38
MBWorld Fanatic!
In the famous words of everybody from Motor Trend and The Smoking Tire, the only radar detector that works is the Valentine 1