**S. FL Dyno Day G2G ...Dec.1st**
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 4,921
Likes: 9
From: Streets of SoFlo
you to Hate
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Dec 2011
Posts: 1,645
Likes: 13
From: tampa florida
19 f-150 limited (w/raptor engine) 06 e55,81SC Targa,08 CLK63 BLK,91 E34 M5
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 4,921
Likes: 9
From: Streets of SoFlo
you to Hate
Senior Member
Joined: May 2008
Posts: 406
Likes: 1
From: Ft Lauderdale FL.
05 crossfire w/SL55 drivetrain installed by Rudy Compart Intake/Needswings best et-10.76 @ 129
Quote:
Originally Posted by shardul View Post
which one of you is going to take amx1937 on his offer and swap the NW intake on their car to see how much HP it picks up?
RBJ said
I might do it just for every one to see.
ok here is how it needs to be done, and being we have all day it can be done that way.
someone (that wants to try my Needswings intake) needs to do their pulls or pull then we install the N W intake ,, they need to drive around for at least 1/2 hour for the ecu to adjust to the new air flow,, then we cool the car down and make another pull.. then we will see if it is what Needswings says it is. maybe we could do this on two cars, as RBJ's car has the ram tubes on it so the increase may be low but there will be a HP increase,,
the second car could be one with a stock intake so we can see the real
difference from stock to Needswings. JIM
Originally Posted by shardul View Post
which one of you is going to take amx1937 on his offer and swap the NW intake on their car to see how much HP it picks up?
RBJ said
I might do it just for every one to see.
ok here is how it needs to be done, and being we have all day it can be done that way.
someone (that wants to try my Needswings intake) needs to do their pulls or pull then we install the N W intake ,, they need to drive around for at least 1/2 hour for the ecu to adjust to the new air flow,, then we cool the car down and make another pull.. then we will see if it is what Needswings says it is. maybe we could do this on two cars, as RBJ's car has the ram tubes on it so the increase may be low but there will be a HP increase,,
the second car could be one with a stock intake so we can see the real
difference from stock to Needswings. JIM
Last edited by amx1397; Nov 29, 2012 at 08:54 PM.
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 4,921
Likes: 9
From: Streets of SoFlo
you to Hate
Quote:
Originally Posted by shardul View Post
which one of you is going to take amx1937 on his offer and swap the NW intake on their car to see how much HP it picks up?
RBJ said
I might do it just for every one to see.
ok here is how it needs to be done, and being we have all day it can be done that way.
someone (that wants to try my Needswings intake) needs to do their pulls or pull then we install the N W intake ,, they need to drive around for at least 1/2 hour for the ecu to adjust to the new air flow,, then we cool the car down and make another pull.. then we will see if it is what Needswings says it is. maybe we could do this on two cars, as RBJ's car has the ram tubes on it so the increase may be low but there will be a HP increase,,
the second car could be one with a stock intake so we can see the real
difference from stock to Needswings. JIM
Originally Posted by shardul View Post
which one of you is going to take amx1937 on his offer and swap the NW intake on their car to see how much HP it picks up?
RBJ said
I might do it just for every one to see.
ok here is how it needs to be done, and being we have all day it can be done that way.
someone (that wants to try my Needswings intake) needs to do their pulls or pull then we install the N W intake ,, they need to drive around for at least 1/2 hour for the ecu to adjust to the new air flow,, then we cool the car down and make another pull.. then we will see if it is what Needswings says it is. maybe we could do this on two cars, as RBJ's car has the ram tubes on it so the increase may be low but there will be a HP increase,,
the second car could be one with a stock intake so we can see the real
difference from stock to Needswings. JIM
cant wait... were gone leave around 6 or 7am
Senior Member
Joined: May 2008
Posts: 406
Likes: 1
From: Ft Lauderdale FL.
05 crossfire w/SL55 drivetrain installed by Rudy Compart Intake/Needswings best et-10.76 @ 129
Place Rage-Tek
$80 per car for dyno use
Time 9:00am- when ever
address: 2021 SW 70th ave,B-9 Davie fl. 33317
Directions
from North,South,
take 95 or turnpike go west. get off at university ,turn left going under 595,,you are now on state rd 84.. now you join the 75 instructions at university..
75 go east,,, Exit at University DR. no turns at this time, you are now on SR 84 (84 is also the exit and entrance for 595),( state road 84 east runs along side 595,, stay on state rd 84,, , ,,(595 will be on your left.) right after car max look for 70 Ave,,,turn right on 70 Ave, go 3/4 of a block turn right again into the first warehouses (Warehouse will be on your left and trees on your right ,,go to the end ,,the last bay is rage-tek,, Oh if you get lost or just want to say hello, you can call rage-tec at 954 915-0016.. jim
C U There
$80 per car for dyno use
Time 9:00am- when ever
address: 2021 SW 70th ave,B-9 Davie fl. 33317
Directions
from North,South,
take 95 or turnpike go west. get off at university ,turn left going under 595,,you are now on state rd 84.. now you join the 75 instructions at university..
75 go east,,, Exit at University DR. no turns at this time, you are now on SR 84 (84 is also the exit and entrance for 595),( state road 84 east runs along side 595,, stay on state rd 84,, , ,,(595 will be on your left.) right after car max look for 70 Ave,,,turn right on 70 Ave, go 3/4 of a block turn right again into the first warehouses (Warehouse will be on your left and trees on your right ,,go to the end ,,the last bay is rage-tek,, Oh if you get lost or just want to say hello, you can call rage-tec at 954 915-0016.. jim
C U There
Last edited by amx1397; Nov 30, 2012 at 12:04 AM.
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 4,921
Likes: 9
From: Streets of SoFlo
you to Hate
Place Rage-Tek
$80 per car for dyno use
Time 9:00am- when ever
address: 2021 SW 70th ave,B-9 Davie fl. 33317
Directions
from North,South,
take 95 or turnpike go west. get off at university ,turn left going under 595,,you are now on state rd 84.. now you join the 75 instructions at university..
75 go east,,, Exit at University DR. no turns at this time, you are now on SR 84 (84 is also the exit and entrance for 595),( state road 84 east runs along side 595,, stay on state rd 84,, , ,,(595 will be on your left.) right after car max look for 70 Ave,,,turn right on 70 Ave, go 3/4 of a block turn right again into the first warehouses (Warehouse will be on your left and trees on your right ,,go to the end ,,the last bay is rage-tek,, Oh if you get lost or just want to say hello, you can call rage-tec at 954 915-0016.. jim
C U There
$80 per car for dyno use
Time 9:00am- when ever
address: 2021 SW 70th ave,B-9 Davie fl. 33317
Directions
from North,South,
take 95 or turnpike go west. get off at university ,turn left going under 595,,you are now on state rd 84.. now you join the 75 instructions at university..
75 go east,,, Exit at University DR. no turns at this time, you are now on SR 84 (84 is also the exit and entrance for 595),( state road 84 east runs along side 595,, stay on state rd 84,, , ,,(595 will be on your left.) right after car max look for 70 Ave,,,turn right on 70 Ave, go 3/4 of a block turn right again into the first warehouses (Warehouse will be on your left and trees on your right ,,go to the end ,,the last bay is rage-tek,, Oh if you get lost or just want to say hello, you can call rage-tec at 954 915-0016.. jim
C U There
Senior Member
Joined: May 2008
Posts: 406
Likes: 1
From: Ft Lauderdale FL.
05 crossfire w/SL55 drivetrain installed by Rudy Compart Intake/Needswings best et-10.76 @ 129
MBWorld Fanatic!
Joined: Dec 2011
Posts: 1,645
Likes: 13
From: tampa florida
19 f-150 limited (w/raptor engine) 06 e55,81SC Targa,08 CLK63 BLK,91 E34 M5
Not going to make it. The p o s asp crank pulley came off on a road test at the mb dealership. Had to get the car towed back to dealership to see the issue
MBWorld Fanatic!
Joined: Oct 2006
Posts: 3,642
Likes: 13
From: Caribbean/Florida/Colorado
E-ZGO 53hp., 1999 E 430 sport, 2004 E 55, 2008 Tahoe LTZ on 24"s
