loungn14

Hey guys,

We had a few stage 3 kits ready to go that were canceled from one of our dealers. So we figured we would let them got for a massive discount!

Get them while they last, first come first served. We have 2 available

Package Includes


Eurocharged 55 Series Performance Engine Software
Eurocharged remote tuning cable
Eurocharged remote tuning software (euroflash)
Eurocharged 55 Series Performance Transmission Software (tcu sent to houston)
180mm Crank Pulley Kit (or supercharger pulley)
Kleeman Headers
82mm Throttle Body Kit
Upgraded Injectors (very important)
55 Series Heat Exchanger
Johnson CM30 I/C Pump

LINK

This sale will only be for these two units. Not applicable for past or future sales.

RETAIL FOR THE PACKAGE IS $7649

RedBullJnky

Great deal on a proven package!!!!!!

60nomad

How much WHP does this kit generally produce? If I chose to use a smaller pulley (168mm) would I need injectors changed also? If not then what is generally the WHP with everything offered but using the 168mm? Thanks

SterlingE55

Low 500s. More with more cooling.

E55Freak

The website says 640ish crank so with drivetrain loss I'm guessing about 520ish at the wheel..

RedBullJnky

You should always go with injectors when upping the boost. And even with a 168 you should still see 500+ whp.

60nomad

Then I am wondering why use the 180mm pulley?

Sterling: You say more cooling...I guess you are referring to meth or what else would you recommend to add for cooling?

SterlingE55

Meth, trunk tank/ split cooling, killer chiller, the bad m'fers on the forum even mod the factory intercooler for better cooling/flow. But specifically a trunk tank and split cooling was what I was referring to.

RedBullJnky

The 180 is like the sweet spot in boost on the stock blower. Anything more is kind of overkill and will take an extreme amout of cooling. Anything under and heat doesn't kill your power as much.

A 168 w/ engine bay tank and CM90 pump would be nice.

SterlingE55

That would be some nice repeatable power!

60nomad

I have the split cooling coming in the mail but honestly I can't understand how that makes such a big difference? That little tank will feed the SC cooler water and that will cool it enough...from that tiny separate tank?

How do you mod the factory intercooler?

SterlingE55

The guys who have modded the intercooler will have to chime in.

Split cooling helps by not circulating the intercooler circuit with the engine coolant (210deg).

RedBullJnky

What split cooling do you have coming?

Manuyc

Quality products from eurocharged

60nomad

RBJ: From Chawkins2001...does anyone know anything about these guys? Seemed like a good guy and it was only $79 but it seemed so simple to just have the all the pieces sent and do it...just do it! It was convenience and hopefully it is all the right stuff...if not then $79...oh well! The first round would have cost that if I went out tonight!

RedBullJnky

That's a cheap round. HardRock prices at the Center Bar get a little ridiculous.

cij911

Well the little quart tank I have is better than stock, but we really need a 3 - 5 gallon tank (like many put in the trunk).

RedBullJnky

You mean BMW res? I have a 3.5 gal tank in my trunk with a Cobra HE mounted under the trunk, then Meth.

cij911

I am using a Ford Cobra reservoir, but similar size to a BMW power steering reservoir....Your setup is much better and I should have just done that initially.

I actually think folks should start with headers and cooling first, and then consider more boost.....

RedBullJnky

I agree.

But this is a S3 and a great price. You don't want to know what I paid.

cij911

Agreed...I wish this was available when I did all of my mods, as I could have saved a bundle....Great deal for anyone on here that wants to see the true potential of the 55k....

viren.89

BlueML99

Any upcoming deals like this on a stage 2?

loungn14

pm sent

loungn14

Hey everyone we have 1 kit left at this price! Get it while it lasts!!!