berti_00

Just had this installed on my buddies (manucy) car yesterday, along with the resistor. The car runs smooth and the power is really instant, soon as you tap the pedal you'll be thrown on the back seat.. Still needs to be tuned from Jerry and gotta get that idler pulley or w.e it is fixed... that seems to be moving a little and making some weird noise...

SilverStrk

Sounds like a bad bearing.. Fix it , tune it and let us All know how this thing works over time.. I am curious... Good luck...

berti_00

yes sir i thought it was the bearing too... and will do

Crissus

77mm is equivalent to which crank size? 180mm?

shardul

iTrader: (1)

yes

viren.89

Are you saying Idler pulley set is required with this "77mm FSC pulley" or "he needs it" ?

So 400 shipped for this and then don't know how much for the "idler set" ?

Maybe Manyc will post his impression soon , I don't know what happened to that "55guy" he was going to post him impression after the tune was tweaked out but he never did.

This is the smallest pulley size you can get right ?

HeissRod

Yeah, I'd replace that idler ASAP based on how much it's moving about

bnzuovr

How much is the clutchless pulley ?

Crissus

Hopefully reasonable cheaper than a clutched one - for obvious reasons...

viren.89

399 shipped , I think, if I read that correctly in the other thread that was started.

MAN55LE

.

Denroll

Definitely not normal with that idler assembly.

Also, did I read that right... He has been driving it without the tune to compensate for loss of clutch? Braver than I am.

Tech-Tune

Is your friend experiencing a "huge surge" with any throttle over 15%? This is what I've heard is the current issue EC is trying to correct through software.

Manuyc

yeah it just surges like crazy at low rpm and steady throttle

johnnyblaze

anyone monitoring IAT's yet with this setup? I would think with the supercharger always "on" it would build heat much faster and stay well above ambient.

Manuyc

there was a lot of heat for sure but to busy to log anything down

Manuyc

here is another video of it
http://s21.photobucket.com/user/jamy...0B1D1.mp4.html

AKnight55

I'd be pretty scared driving around in this case. Running roughly 180 mm pulley, 82mm TB and no upgraded injectors? No to mention no headers as well. I can't imagine what kind of heat this thing is making. I'd at least get a scanner at autozone to be sure your IATs aren't at dangerous levels.

Manuyc

I have a good Scanner at home AKnight55, right now the car is in the garage waiting for tune. then ordering new idler pulley too

Manuyc

will envenuatly get trunk tank too as per reconmendation of albert

Toadster

non-sideways view

berti_00

tooddd what would we do without you here??? no idea

AMG E Power

go Toad !

DVC

We need some drive-by vids on the boost

berti_00

I just filled my whole tank of gas today with Non-Ethanol.... shes ripping lol