To all who have the Torque PRO Android APP.
10-18-2013, 03:06 PM
#26
Super Member
Yes, it's compatible, I use it
See, I'm convinced something was up with my car. I was seeing 12psi on a 180mm pulley and 13.5psi on an additional 84mm SC pulley. I know the longtubes create a boost drop but there's got to be something else going on.
It's all in the software. The Kiwi has a better signal with customer service if needed and it's not chinese crap. I have the Kiwi, works great.
Hey everyone. Just read up on this a little bit and was hoping for some clarification. I have an android based phone. What is the difference with the Kiwi Bluetooth Wireless adapter and the ELM327? Is there any differences in terms of features and functionality. They all seem to use the same app, just wondering if there is a benefit to having the Kiwi, i.e stores more data, etc.. or does the software do all that?
Sorry for the confusion, I just noticed that there is a pretty significant price difference between the two items and wondered which one made more sense. Many thanks in advance to replies.
Sorry for the confusion, I just noticed that there is a pretty significant price difference between the two items and wondered which one made more sense. Many thanks in advance to replies.
09-08-2014, 01:39 PM
#27
Newbie
Join Date: Sep 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
c250
11-20-2014, 11:24 AM
#28
Newbie
Join Date: Sep 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
c250
04-27-2016, 04:27 PM
#29
Torque with ELM ODB2 not connecting via Bluetooth
04-27-2016, 07:04 PM
#30
MBWorld Fanatic!
I guess that app not as popular as I thought. Anyway the reason for me asking is to check what actual boost is from stock cars at sea level versus what I am getting up at 5000' elevation and then what is achieved by guys with the supercharger pulley installed. I have been reading articles saying stock boost is. 11.6psi. i think that figure is a Little high. Probably more in the region of 9psi. (0.6bar) well stock my car only managed 0.4 bar (6psi) up at 5000' according to this app. After the mods belt wrap kit supercharger pulley. The. Boost increased to 0.5bar (7.2psi) so trying to figure out what my loss in boost pressure is up here.
I'm using the iphone app forget what it's called. Ive heard better thing about torque. But, it doesn't exist for iphone without jailbraking.
Now sure if mine is high or yours is low. Just sharing.
BTW my IAT when @ 5000 feet above sea level was 20-25 above ambient city stop and go. 10-15 cruising highway. After a hard blast it would drop back down to where I started in about 30 seconds of cruising at 60-65mph. After a hard WOT triple digit run, it would get up to 160-180 degrees then quickly drop as I cruised.
Last edited by Max.H; 04-27-2016 at 07:10 PM.
08-19-2016, 01:15 AM
#31
Senior Member
Torque Pro negative on boost PSI gaugee?
got a quistion Torque pro boost is showing negative readins, why is that anyone`
Do I need to switch to in/Hg units ?
Do I need to switch to in/Hg units ?
08-19-2016, 01:19 AM
#32
Senior Member
Wait think I got it, if im right have to tick of Dont Convert PSI to Neagtive in/Hg..
Was on,,
Really hate that I love it touchec to much,, anyone adjusted anything or just stock settings all the way?
Was on,,
Really hate that I love it touchec to much,, anyone adjusted anything or just stock settings all the way?
