PB at island dragway B.I.P. stock pulley power
#1
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes
on
24 Posts
99 ford lightning
PB at island dragway B.I.P. stock pulley power
The da was about 800 when i ran 54 deg out first pass spun a 1.69 sixty foot and went 11.59 at 120.13mph on my street tune. 10deg cooler then last week and the airchage was about 110deg by the end of run and calmed down to about 77 on return road. Down hill from there that run did it for my lsd. next run 2.3 ssixty foot then a 2.4 sixty foot. I need a posi. funny though the car would still trap 119mph and change. Tony at bip helped this past weekd with shift delay issues def much better. I have 11.40s in this car with a rear easy, but my next mod should be gong on in a week or two mbh headers. Then its a bip retune and track test.
#7
MBWorld Fanatic!
Solid numbers! What are your current mods?
Was this on drag radials or street tires?
Was this on drag radials or street tires?
Trending Topics
#13
MBWorld Fanatic!
Think I said this before, your car is definitely one of those factory freaks. Congrats on the NPB!
No video? Would like to see the flash on the torque convertor and how it shifts compared to the stock unit.
No video? Would like to see the flash on the torque convertor and how it shifts compared to the stock unit.
#14
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes
on
24 Posts
99 ford lightning
no i wish my gf had trouble with the camera. There is still prob a lil room in the tune as well my af is safe across the board as well. Im curious what the longtube headers will do for me when they get here.
#16
MBWorld Fanatic!
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#19
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes
on
24 Posts
99 ford lightning
i would of had them, they been done forgot to give mike my address for all that ***** about his service i had no problems he actually worked with me getting these things.
#21
MBWorld Fanatic!
These cars are very quick from the factory. I just missed 11.6's and my only mod at that time was 17" drag radials. 99 did the same thing I did, get the most out of your car without throwing a ton of $$ at it. There was a method to my madness just as there's a method to his madness. I can't remember which headers you picked but if you selected MBH
you're going to love them.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#22
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes
on
24 Posts
99 ford lightning
ha the basics like a good posi i looked back to my video when before tune and i was doing one legged burnouts. i should of changed it then. My wavetrac came in today. i do have the mbh longtubes on the way mike said they were done last week.
#23
MBWorld Fanatic!
Awesome, between the LSD and the MBH's 11.3x - 11.4x @123 is possible
#24
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes
on
24 Posts
99 ford lightning
if my buddy gets the car back together before sunday id like to get a fair shot at a run with a good rear if i was able to go 1.64 with a shot rear it may go 1.60 or 1.59 with two wheels heated and gripping. so maybe a .40's without the mbh headers. if not i will run it when its all done no biggy. I remember in my lightning i was stuck at 12.0 changed the posi and went 11.80's its a overlooked dumb part to not upgrade
#25
MBWorld Fanatic!
if my buddy gets the car back together before sunday id like to get a fair shot at a run with a good rear if i was able to go 1.64 with a shot rear it may go 1.60 or 1.59 with two wheels heated and gripping. so maybe a .40's without the mbh headers. if not i will run it when its all done no biggy. I remember in my lightning i was stuck at 12.0 changed the posi and went 11.80's its a overlooked dumb part to not upgrade