80mm or 82mm?
#26
Super Member
cost. unless you would like to say 400 plus for the 80 snout and what ever the flanges go for these days.
with the flange the y pipe and air boxes are post back toward the firewall by the thickness of the flange which sometimes will result in air boxes not being fastened to the original mounting points on the valve coves
with the flange the y pipe and air boxes are post back toward the firewall by the thickness of the flange which sometimes will result in air boxes not being fastened to the original mounting points on the valve coves
Sweet, thank you . Is that the 80mm? or the 82?
#27
MBWorld Fanatic!
For the stock plenum you will need to cut off and bore to 82mm then find a plate to weld onto the plenum to screw into the 82mm tb
The sl55 plenum will be 80mm
The sl55 plenum will be 80mm
#28
Former Vendor of MBWorld
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes
on
242 Posts
2003 W211 E55, 2003 W220 S600
you can port match the 74mm inlet to the 82mm and then add material on the top to mate it to the OEM MB 82mm
like this. cleanest and most cost efficient way to mate a 82mm to a factory inlet
https://mbworld.org/forums/engine-pe...ed-plenum.html
In the pic you can see the bottom mounting position is OEM (74mm inlet)
like this. cleanest and most cost efficient way to mate a 82mm to a factory inlet
https://mbworld.org/forums/engine-pe...ed-plenum.html
In the pic you can see the bottom mounting position is OEM (74mm inlet)
Last edited by shardul; 04-10-2015 at 12:40 PM.
#29
MBWorld Fanatic!
Everything you need for the 82mm tb
-MB 82mm t/b: 2731410325
-82mm t/b gasket: 2731410680- 14.61 retail
-80mm s/c inlet: 1131400912- 436.80 retail
-s/c inlet gasket: 1131410780- 13.78 retail
-80mm Y-pipe: 1130900329- 286 retail
-O-rings for Y-pipe: 90025K396 (www.mcmaster.com)
Have the snout bored to match the 82mm and if needed add material to the snout so that the screw holes can be relocated so that the 82mm can bolt up to it.
-82mm t/b gasket: 2731410680- 14.61 retail
-80mm s/c inlet: 1131400912- 436.80 retail
-s/c inlet gasket: 1131410780- 13.78 retail
-80mm Y-pipe: 1130900329- 286 retail
-O-rings for Y-pipe: 90025K396 (www.mcmaster.com)
Have the snout bored to match the 82mm and if needed add material to the snout so that the screw holes can be relocated so that the 82mm can bolt up to it.