demetaktak

Planning on shortening the diff. 2.82/2.87/3.06
I seen a post about 2.82 but nothing in the ithers. Anybody running 3.06?
What does it feel like ?

chawkins2001

I ran that ratio, it was nasty. The car felt way lighter on its feet and pulled extremely hard. The sotp was very noticeable

saleen01

anyone know where to get these gears new online>?

Hulk

You can get the dodge gears.

saleen01

online source or part number i can give local dealer?

Hulk

Goto the dodge forums, those guys are switching out their gears all the time

RedBullJnky

I have 3.06 gears also and I agree with this^^^^^

cm60k

Is TCU can be programmable with 3.27:1 or 3.46:1..?

anyone tried any of these Ratio's..??

ZAYED,,

Havoc

Sounds like the perfect mod to do when changing out LSD's..

Does the SL55 have 3.06 gears??

Hulk

SL55 = 2.82

demetaktak

Great. Great info. Looking forward to this mod. I m going to go for an used one. They are fairly cheap down here. I could go for even 3.27. I am worried on the top end does it still pull hard and whats the max speed for 3.06? I hope it does at least 300. Really dnt want to compromise 300. Its my pride n joy ��

Havoc

Well that's just too high..

Hulk

lol

JoeNobody

I have 2.82 and I love it. Second gear pulls really hard, and you can launch using second gear as well.

black06c230

3.06 here had them done when doing the high stall TQ Conv and LSD. Good move to make.

kponti

So no more issues with tuning for higher gears?

RedBullJnky

Not with my tuner

cnterline

Who sets up gears on this mod,

Hulk

Eurocharged and weistec

MTV10

What is stock gearing on E55?

Hulk

2.65

MTV10

I don't know guys...

I love the tall gearing on the E55. With the broad torque range it's really well suited. I love doing pulls starting at 70km/h and never having to shift until 130km/h++

Ls1toAMG

I like it too. It's incredible it can perform that well with such a high gear. The lower gear will give you more of the pants and the seat feel. But it may not translate into better times. Personally I can't get enough 80mph kick down
Beats the hell out of any BB Chevy I ever had. Then again they had 3.50+ rear gears.

cnterline

That's why I never did it ,high 1.5 60 ft with stock converter and 18 inch drag radial

demetaktak

I am worried it will just die in 5th. With 3.06 i will need 5th at about 160mph and i fear everyone will start catching up. For redbulljunky this could be very different coz he doesnt have any low end torque. But we do. I ll just have to see.