Car won't crank after installing tune-- help
#1
MBWorld Fanatic!
Thread Starter
Car won't crank after installing tune-- help
Well all went well downloading tune went to 100 complete did what the directions said. Went to start the car and it won't crank over . Battery is full and still on charger. I am getting a esp malfunction that I never had before.
I tried dyno mode and it still won't crank.
Tony said to try to flash it again and I did. Same thing.
Any ideas? May have blown a fuse maybe. I may end up sending my ECU to have to reset and tuned but I'm not sure if that will fix it
I tried dyno mode and it still won't crank.
Tony said to try to flash it again and I did. Same thing.
Any ideas? May have blown a fuse maybe. I may end up sending my ECU to have to reset and tuned but I'm not sure if that will fix it
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#3
MBWorld Fanatic!
Thread Starter
He said to try to reflash 3-4 times. Also have the option to have him tune it through the Internet with my computer. If that fails he wants me to send it in.
#6
MBWorld Fanatic!
Thread Starter
Yep thanks. I put a 84mm sc pulley on. Unknowingly the washer for the bolt fell into the fan shroud when I yanked on the pulley and was hidden against the radiator. Took me forever to think of where it could have gone. Live and learn. I am learning about the car though..
Last edited by Ls1toAMG; 11-18-2015 at 10:24 PM.
Trending Topics
#8
MBWorld Fanatic!
starter? I mean yeah it could be the tune that is preventing a crank but WHAT IF you starter randomly failed... You get no ticking when turning key in EIS?
#9
MBWorld Fanatic!
Thread Starter