Has anyone done a comparision of all Long Tube headers ?
08-02-2016, 10:51 PM
#1
Senior Member
Thread Starter
Has anyone done a comparison of all Long Tube headers ?
Not only comparing differences in performance but also fitment and build quality ?
Just wondering as we have a good selection between ARH/Kooks, MBH, Weistec, Dynocomp...
Just wondering as we have a good selection between ARH/Kooks, MBH, Weistec, Dynocomp...
Last edited by ss.dna02; 08-05-2016 at 05:27 AM.
08-03-2016, 01:54 AM
#2
MBWorld Fanatic!
I have ZERO complaints about my MBH headers and when we installed them they were a EASY bolt on. Everything lined up and they look like they came from the factory
08-03-2016, 07:24 AM
#4
MBWorld Fanatic!
You're not going to find direct performance comparisons between the long tubes for these cars.
There are essentially only 2 choices left...ARH and MBH (also OBX - chinese ARH copies). Kooks and Weistec don't make them for the 113K and DynoComp is MBH.
There are numerous differences between the ARH and MBH headers. Search my username for a detailed comparison in specs and construction.
There are essentially only 2 choices left...ARH and MBH (also OBX - chinese ARH copies). Kooks and Weistec don't make them for the 113K and DynoComp is MBH.
There are numerous differences between the ARH and MBH headers. Search my username for a detailed comparison in specs and construction.
08-04-2016, 01:37 PM
#6
MBWorld Fanatic!
Join Date: Feb 2008
Location: SoCaL (LA / OC)
Posts: 1,261
Likes: 0
Received 21 Likes
on
19 Posts
E55 AMG (SOLD), EvoSport CLK (SOLD), 2013 GsxR 750 (SOLD)
You're not going to find direct performance comparisons between the long tubes for these cars.
There are essentially only 2 choices left...ARH and MBH (also OBX - chinese ARH copies). Kooks and Weistec don't make them for the 113K and DynoComp is MBH.
There are numerous differences between the ARH and MBH headers. Search my username for a detailed comparison in specs and construction.
There are essentially only 2 choices left...ARH and MBH (also OBX - chinese ARH copies). Kooks and Weistec don't make them for the 113K and DynoComp is MBH.
There are numerous differences between the ARH and MBH headers. Search my username for a detailed comparison in specs and construction.
MBH headers are made by DynoComp
Correct. BenzWorks does make headers. Quality is equal to MBH. Excellent shop all around for all your needs.
The following users liked this post:
VictoryRoadPerformance (07-01-2019)
08-04-2016, 05:22 PM
#7
Senior Member
Thread Starter
You're not going to find direct performance comparisons between the long tubes for these cars.
There are essentially only 2 choices left...ARH and MBH (also OBX - chinese ARH copies). Kooks and Weistec don't make them for the 113K and DynoComp is MBH.
There are numerous differences between the ARH and MBH headers. Search my username for a detailed comparison in specs and construction.
There are essentially only 2 choices left...ARH and MBH (also OBX - chinese ARH copies). Kooks and Weistec don't make them for the 113K and DynoComp is MBH.
There are numerous differences between the ARH and MBH headers. Search my username for a detailed comparison in specs and construction.
I saw Weistec offering these....
http://weistec.com/m113k-exhaust-system-e55.html
Trending Topics
08-04-2016, 06:39 PM
#8
Former Vendor of MBWorld
08-05-2016, 05:35 PM
#9
MBWorld Fanatic!
Join Date: Feb 2008
Location: SoCaL (LA / OC)
Posts: 1,261
Likes: 0
Received 21 Likes
on
19 Posts
E55 AMG (SOLD), EvoSport CLK (SOLD), 2013 GsxR 750 (SOLD)
Only reason why I stated that was because when I spoke to DynoComp a couple years back, that's what I was told (by them directly).
Since then, that's all I kept thinking.
08-05-2016, 11:57 PM
#10
Senior Member
Thread Starter
I personally never seen pictures of their systems. Was always curious to see them.
Nevermind, I stand corrected.
Only reason why I stated that was because when I spoke to DynoComp a couple years back, that's what I was told (by them directly).
Since then, that's all I kept thinking.
Nevermind, I stand corrected.
Only reason why I stated that was because when I spoke to DynoComp a couple years back, that's what I was told (by them directly).
Since then, that's all I kept thinking.
