Best location for temporary fitment of a fire extinguisher?
In my old car i made a bracket and bolted it down to the seat mounts, but a quick look tells me that isn't possible in the E55. did a search but didn't find much other than the ones that fit inside the seat compartments. they wouldn't comply though and i probably couldn't source before Friday anyway.
nothing like leaving things till the last minute

all suggestions welcome?




In my old car i made a bracket and bolted it down to the seat mounts, but a quick look tells me that isn't possible in the E55. did a search but didn't find much other than the ones that fit inside the seat compartments. they wouldn't comply though and i probably couldn't source before Friday anyway.
nothing like leaving things till the last minute

all suggestions welcome?
hope that helps,
Chris\
EDIT .... oops, my bad .... I did not read your entire post (I see you have already considered and dismissed the compartment solution).
Last edited by latemodel21; Sep 26, 2017 at 02:38 PM.
Not sure why you can't remove the passenger seat completely and make a mount that bolts where the seat went.
was actually able to re-purpose the bracket i had for my old car, so that saved me some time and effort.
took a closer look at the seat compartments under the front of the seat and after I took the first aid kit out, i checked to see if i could route some zip ties around the frame. While looking, I noticed the bottom bar had two 3/16" holes in it, so i put my bracket underneath, marked the holes and drilled it to suit. fitted two bolts and Bob's ya Uncle...
Also played a bit of hide & seek with the battery, discovering it under the boot (trunk) floor lining. Fitted a battery triangle sticker and also a tow point sticker and now she is ready to be checked by the scrutineers.
Also tried my helmet on for the first time since November last year. I reckon it might have shrunk as i could barely fit my melon in there...

Thanks to all who commented.
Trending Topics
the bracket the extinguisher is mounted to is a length of 20mm angle iron, the the actual extinguisher bracket bolts to that and that is bolted to the seat.
The Best of Mercedes & AMG



