East Coast Euro M113 Engine Mounts and 722.6 Transmission Mounts
#54
MBWorld Fanatic!
https://eastcoasteuro.com/services/
Their email is down the bottom. Doesn't look like there is an online shop.
Their email is down the bottom. Doesn't look like there is an online shop.
#55
Former Vendor of MBWorld
Thread Starter
$465 shipped in the USA for engine mounts and $175 for trans mount. You can email info@eastcoasteuro.com
Thank you. That's correct, we do not have an online store as we like to talk to each customer and make sure they are getting what they are looking for and to let them know availability.
https://eastcoasteuro.com/services/
Their email is down the bottom. Doesn't look like there is an online shop.
Their email is down the bottom. Doesn't look like there is an online shop.
Last edited by East Coast Euro; 08-10-2019 at 01:26 PM.
#56
Senior Member
Join Date: Aug 2014
Location: SoCal - OC
Posts: 266
Received 35 Likes
on
25 Posts
2004 CL55, 2003 SL55 and 2009 G55
The inserts that come stock are black and I had one split down the center after about 8 months and 4K miles. Glad the clear ones come as spares. How much firmer are they compared to the black ones? I haven’t noticed any harsher conditions but concerned with mileage. Have you had any of the clear or red split? How many miles are people getting out of them?
thanks
Mick
thanks
Mick
#58
Senior Member
Join Date: Aug 2014
Location: SoCal - OC
Posts: 266
Received 35 Likes
on
25 Posts
2004 CL55, 2003 SL55 and 2009 G55
Thanks. You guys are the best. Super easy to replace and can’t say enough good things of the mounts. Seriously took me less than 30 minutes to take out clean, take pictures and replace.
#59
Junior Member
Hey Guys,
wanted to bump this post as I am looking to be putting a set of these on my car in the near future. I have a 507 edition FL 204 and am starting to get a bit of the vibration at startup and cold idle; for those of you who have done the install, and preferably done so with headers..how complicated and difficult is the job? just trying to plan accordingly, I am running long tubes up front as well so just trying to know what to expect.
Thank you!
wanted to bump this post as I am looking to be putting a set of these on my car in the near future. I have a 507 edition FL 204 and am starting to get a bit of the vibration at startup and cold idle; for those of you who have done the install, and preferably done so with headers..how complicated and difficult is the job? just trying to plan accordingly, I am running long tubes up front as well so just trying to know what to expect.
Thank you!
#60
Former Vendor of MBWorld
Thread Starter
Hey Guys,
wanted to bump this post as I am looking to be putting a set of these on my car in the near future. I have a 507 edition FL 204 and am starting to get a bit of the vibration at startup and cold idle; for those of you who have done the install, and preferably done so with headers..how complicated and difficult is the job? just trying to plan accordingly, I am running long tubes up front as well so just trying to know what to expect.
Thank you!
wanted to bump this post as I am looking to be putting a set of these on my car in the near future. I have a 507 edition FL 204 and am starting to get a bit of the vibration at startup and cold idle; for those of you who have done the install, and preferably done so with headers..how complicated and difficult is the job? just trying to plan accordingly, I am running long tubes up front as well so just trying to know what to expect.
Thank you!
We have a DIY write-up for the W204 C63 here to see what's involved with install. Feel free to message me with any other questions you have. Thank you
https://mbworld.org/forums/c63-amg-w...oast-euro.html
The following users liked this post:
Codyg253 (10-16-2019)
#65
SPONSOR
Join Date: Sep 2014
Location: Worldwide
Posts: 3,628
Received 798 Likes
on
570 Posts
2007 Mercedes E63 AMG
The inserts that come stock are black and I had one split down the center after about 8 months and 4K miles. Glad the clear ones come as spares. How much firmer are they compared to the black ones? I haven’t noticed any harsher conditions but concerned with mileage. Have you had any of the clear or red split? How many miles are people getting out of them?
thanks
Mick
thanks
Mick
The following users liked this post:
AMG_55_cruiser (01-12-2024)
#70
whats your opinion on the creative steel ones?
#72
Last edited by sanjan; 02-21-2022 at 02:14 AM.