replaced from strut with Arnott now communication error
01-22-2021, 03:06 PM
#1
Super Member
Thread Starter
replaced from strut with Arnott now communication error
developed a serious leak in the right front strut, was going to order both Arnotts new not rebuilt but only the right one (AS-2787) was available so I ordered and am backordered for the AS-2788.
Went ahead and replaced today since that is the side that is bad anyway, got it installed, electrical connectors are very tight (thinking Maybe I didn't get the them fully inserted.) trying to release pressure or add pressure and I get Communication Error 8.xxxx (need to go see what the actual error is).
I am about to go double check the top connector, as that is the one that controls the air valve. anything else I should look at?
Went ahead and replaced today since that is the side that is bad anyway, got it installed, electrical connectors are very tight (thinking Maybe I didn't get the them fully inserted.) trying to release pressure or add pressure and I get Communication Error 8.xxxx (need to go see what the actual error is).
I am about to go double check the top connector, as that is the one that controls the air valve. anything else I should look at?
01-22-2021, 03:24 PM
#2
Super Member
Thread Starter
Think I have already figured it out, might be a bent pin issue.. here's hoping I can get a mechanical pencil down in there to get it straight.
