When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Post your wheel/tire setup with pictures and information...
Why not make a thread of all of our setups. Post pictures of wheel size , offset , tire size and if any fender mods were needed to make that setup work. This would be a good reference thread for newcomers or just members looking to switch it up, this way you can get an idea of what size/setup you would like to run before making any big purchases.
This is for any w212 e63 model.
List the following. Summer & Winter wheels , OEM or Aftermarket.
Wheel make/name (ADV1)
Wheel size (20x9.0)
Offset (33-45ET)
Tire size (285/40/20)
Suspension (coilovers/h&r sports/stock...etc etc)
Modifications if needed (fender roll/trimmed fender liners/spacers...etc etc)
And most of all post 2-4 good images of each setup so that the fitment can be seen clearly.
Please try to keep the images semi small (800x600ish) so that there is better load time. thanks.
'03 E55, Range Rover Sport Supercharged, Ducati 748R
Originally Posted by raudiace4
Looks good, will it rub in the back if you lower? Looks flush, would 295s with 10.5" wide at Et45 be ok?
I think I could still lower this car and not rub. After the camber is reset I might have to adjust the offset slightly to but I think it can be done. 295s would be no problem and if you're not lowered I think (but don't hold me to it) ET45 would work.
Rohana RF2 wheels on Nitto Neo Gen All-Season Tires, factory height, no rubbing on any suspension settings ever. Tires are within .1" overall diameter of factory 19" tires. If I put a straightedge (yard stick) on the fender lip to the ground down the center of the wheel, the face of the outer lip of the rim is 7mm in from the fender on the front and rear both so these are the correct offsets to be even. I would like to lower the front 1/2" if I can find springs that do that, I dont forsee any reason it would rub then either.
iownedu, that thing looks nasty. I am usually not a fan of colored wheels, but wow. The red really sets off and compliments the whole car. If only it had that color red interior!!! I've considered red Vossen's, but I feel like that is the BBS of the tuner world. Great looking wheels, but everyone has them. These are unique!
iownedu, that thing looks nasty. I am usually not a fan of colored wheels, but wow. The red really sets off and compliments the whole car. If only it had that color red interior!!! I've considered red Vossen's, but I feel like that is the BBS of the tuner world. Great looking wheels, but everyone has them. These are unique!
Yeah I went out on a limb by ordering them in red, I was going to get the titanium finish originally. I was going to sell them and replace them with titanium if I didn't like the red. But it actually turned out really well, it's a very nice shade of red and actually goes with the diamond white/black of the car.
My car actually has designo Mystic red/black interior as well.
No proper pics yet. Waiting for summer to do that now. But here's what I am running in the summer...
Wheel make/name: Vossen VLE1
Wheel size: FR-20x9.0 R-20x10.5
Offset: FR-32 R-42
Tire size: FR:255-30-20 R-285-25-20
Suspension: Stock for now but have springs and links to be put on soon.
Wow, that's a unique look for the wagon! Very nice.
Originally Posted by hotrodwagon
No proper pics yet. Waiting for summer to do that now. But here's what I am running in the summer...
Wheel make/name: Vossen VLE1
Wheel size: FR-20x9.0 R-20x10.5
Offset: FR-32 R-42
Tire size: FR:255-30-20 R-285-25-20
Suspension: Stock for now but have springs and links to be put on soon.
Rohana RF2 wheels on Nitto Neo Gen All-Season Tires, factory height, no rubbing on any suspension settings ever. Tires are within .1" overall diameter of factory 19" tires. If I put a straightedge (yard stick) on the fender lip to the ground down the center of the wheel, the face of the outer lip of the rim is 7mm in from the fender on the front and rear both so these are the correct offsets to be even. I would like to lower
the front 1/2" if I can find springs that do that, I dont forsee any reason it would rub then either.
Front:
20x9, 25mm offset Wheel
245/30ZR20 Tire
Rear:
20x10, 45mm offset Wheel
305/25ZR20 Tire
Looks nice! The front tire looks a little stretched can you use a slightly larger tire to get a little more meat ? Or would a 81/2 " rim be better? I'm only asking I'm not to experienced with figuring out wheel offsets, Is your front tire really 25mm or 35 mm , I seen most rim places recommend 35mm for front ?
^ looks great! Rear fitment looks perfect. Are you rubbing at all? What are you lowered on? Which brand tires are you running? Lastly, how's the fitment front vs rear?
^ looks great! Rear fitment looks perfect. Are you rubbing at all? What are you lowered on? Which brand tires are you running? Lastly, how's the fitment front vs rear?