jvakos

Vdub - so you're on original front rotors and did new pads at 40k miles? nice. you recall what your rotor spec was when you put new pads on at 40k? I recall reading somewhere that the MB spec for our front rotors was 24-26mm to be safe to continue using them. I need to get mine measured... was told they were low per MB dealer, but if low means i can get 10k more miles out of them then i am find to do that since i only drive about 5k miles per year.

TECHNICIAN

Rotor minimum thickness spec is stamped on the rotor. MB says the service limit is .5mm above the stamped minimum

jvakos

cool thanks a bunch...will look for that on the rotor