Oil pump solenoids
#326
#328
#329
Looks like you were right. Just fired up the car again, all is normal again with hi then to low idle pattern.
The following users liked this post:
SuprSpeedrBaker (12-19-2023)
#331
Out Of Control!!
Join Date: Jun 2004
Posts: 11,700
Received 2,031 Likes
on
1,418 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
Anyone do this mod who have:
- ECU tune
- TCU tune
- both
curious how this affects tuned cars, also curious as always @Cifdig 's opinion on all this.
thx
- ECU tune
- TCU tune
- both
curious how this affects tuned cars, also curious as always @Cifdig 's opinion on all this.
thx
Last edited by PeterUbers; 12-20-2023 at 09:47 AM.
The following users liked this post:
momo a (12-19-2023)
#332
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,438
Received 3,369 Likes
on
2,241 Posts
MY'14 W212 M276 3.5NA @55kMi
Do you happen to know what these tune patches do to the Bosch/Continental software?
Evaluate what it does and what you want - Pulling the plug does not modify the software that remains the same tuned or not tuned.
Oil mod extends the mechanical limits to get the ECU/TCU get in great mood from 0 to 100Mph
Last edited by CaliBenzDriver; 12-19-2023 at 10:41 PM.
The following 3 users liked this post by CaliBenzDriver:
#333
Out Of Control!!
Join Date: Jun 2004
Posts: 11,700
Received 2,031 Likes
on
1,418 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
I think @JettaRed originally had a tune, then removed for lag, then retuned after pump solenoid to test interactions.
Do you happen to know what these tune patches do to the Bosch/Continental software?
Evaluate what it does and what you want - Pulling the plug does not modify the software that remains the same tuned or not tuned.
Oil mod extends the mechanical limits to get the ECU/TCU get in great mood from 0 to 100Mph
Do you happen to know what these tune patches do to the Bosch/Continental software?
Evaluate what it does and what you want - Pulling the plug does not modify the software that remains the same tuned or not tuned.
Oil mod extends the mechanical limits to get the ECU/TCU get in great mood from 0 to 100Mph
each one will need to "learn and lambda"
so to speak, correct?
I don't know what they do to the Bosch/conti software
#334
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,524
Received 1,601 Likes
on
1,194 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
I think @JettaRed originally had a tune, then removed for lag, then retuned after pump solenoid to test interactions.
After pulling the plug on the solenoid, I thought I would try the old Stage 2 file and voila, the drivability issues disappeared while I got the full performance of the tune back. The tune actually feels stronger than it did before pulling the plug.
While I don't have a TCU tune, I did have @BenzNinja install his transmission program which added a fourth mode (Agility), which may already be available on AMG cars as S+. (Peter's program also remembers the last tranny mode setting and if you are in any mode besides E, the car will start in the S mode when starting the car again.) The difference is that I have the standard 7G tranny. For me, the Agility mode is much more aggressive than the S mode.
The following users liked this post:
PeterUbers (12-20-2023)
#336
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,438
Received 3,369 Likes
on
2,241 Posts
MY'14 W212 M276 3.5NA @55kMi
multiple ECU boxes
I would try to be vanilla-stock so you can monitor your engine mechanicals gradually improving:
- piston rings seals improve.
- lambda cleanup carbonized oil.
- HPFP rattlesnake radically morphes
It seems too many testers expects 100% transformation on day-1. In fact the normal oiling is only first step of this transformation.
Once you switch back to another ECU you are going to get old stalled inappropriate maps. Just like after unplugging solenoid ECU/TCU have to relearn performance maps, better temperatures regulation, drastically improved engine output through shift-points.
I dont know how well TCU tolerate getting paired with different ECU. I know the ECU has intank ethanol sensor to taste E85 gasoline grade for combinations. It tweaks ignition advance to pre-ignition - amazin now as we know how ECU targets to roast the engine with super-heated pistons.
With normally cooled pistons the hot spots pre-ignition should be vastly improved.
The way we have awesome power above idle tells me mixture is more rich, so better better cooled from mixture than leaner.
I am not a fan of wacking adaptations to get anything fixed... try doing than on your spare boxes after 1500Mile stock vanilla when engine is in better mood.
I hope some of the wise developers coding tune extensions for Bosch knew about the limited oiling. Personally I have no interest in coding newer advanced oiling RPM limits maps... BECAUSE when that valve jams, engine is RIP.
No valve, no coding, no problem.
The following 2 users liked this post by CaliBenzDriver:
juanmor40 (12-20-2023),
PeterUbers (12-20-2023)
#338
Out Of Control!!
Join Date: Jun 2004
Posts: 11,700
Received 2,031 Likes
on
1,418 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
What about emissions testing -
even with a shadow code - any risk of not passing?
even with a shadow code - any risk of not passing?
#339
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2020
Posts: 1,821
Received 651 Likes
on
448 Posts
04 E55 AMG (totaled), 07 S550 4Matic, 14 E63S
I do not know for sure. But I have two silent codes now: one for the intercooler pump bypass, and now one for the oil pump valve.
My experience tells me that if the CEL is not illuminated, and all OBD systems are ready, by definition, it is a pass for a plug-in test. I actually haven't checked OBD readiness but I think that would answer the question. Then, one of us will eventually find out for certain.
I am in an emissions state. If my silent codes are a problem, I would be contacting BenzNinja because I would suspect that something can be worked in developer mode - neither of these codes impact emissions compliance which is why they don't trigger the CEL in the first place.
My experience tells me that if the CEL is not illuminated, and all OBD systems are ready, by definition, it is a pass for a plug-in test. I actually haven't checked OBD readiness but I think that would answer the question. Then, one of us will eventually find out for certain.
I am in an emissions state. If my silent codes are a problem, I would be contacting BenzNinja because I would suspect that something can be worked in developer mode - neither of these codes impact emissions compliance which is why they don't trigger the CEL in the first place.
The following 2 users liked this post by kevm14:
CaliBenzDriver (12-20-2023),
JettaRed (12-20-2023)
#340
Out Of Control!!
Join Date: Jun 2004
Posts: 11,700
Received 2,031 Likes
on
1,418 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
I do not know for sure. But I have two silent codes now: one for the intercooler pump bypass, and now one for the oil pump valve.
My experience tells me that if the CEL is not illuminated, and all OBD systems are ready, by definition, it is a pass for a plug-in test. I actually haven't checked OBD readiness but I think that would answer the question. Then, one of us will eventually find out for certain.
I am in an emissions state. If my silent codes are a problem, I would be contacting BenzNinja because I would suspect that something can be worked in developer mode - neither of these codes impact emissions compliance which is why they don't trigger the CEL in the first place.
My experience tells me that if the CEL is not illuminated, and all OBD systems are ready, by definition, it is a pass for a plug-in test. I actually haven't checked OBD readiness but I think that would answer the question. Then, one of us will eventually find out for certain.
I am in an emissions state. If my silent codes are a problem, I would be contacting BenzNinja because I would suspect that something can be worked in developer mode - neither of these codes impact emissions compliance which is why they don't trigger the CEL in the first place.
thanks.
also - what if my oil pump fails in the future and I have unplugged this solenoid. How will I know the pump is gone other than engine issues?
also will this shorten the life of my oil pump?
additionally I tried accessing it from the top and I can just touch it but can't see anything - it's all feel. Also my arm got stuck lol soooo will be dropping the pan.
gm based video discussing all the same things:
Last edited by PeterUbers; 12-20-2023 at 09:38 AM.
#341
Senior Member
Join Date: Jan 2018
Location: Atlanta GA
Posts: 463
Received 149 Likes
on
119 Posts
2012 E350 Cabriolet now SOLD to my son
Is this oil pump solenoid in the 2012 M276 V6 as well ? wondering if that plus the oil check valve failures caused the more severe damage to the bottom end bearings upon start up. In my mind, if the pump was stuck on low volume position, that would certainly aggravate the timing issues and lack of oil to the mains and rods on cold start. Plus there are reports of cylinder scoring on the M276 too.....
#342
Senior Member
Join Date: Jan 2018
Location: Atlanta GA
Posts: 463
Received 149 Likes
on
119 Posts
2012 E350 Cabriolet now SOLD to my son
thanks.
also - what if my oil pump fails in the future and I have unplugged this solenoid. How will I know the pump is gone other than engine issues?
also will this shorten the life of my oil pump?
gm based video discussing all the same things:
https://youtu.be/-1f1u960I-I
also - what if my oil pump fails in the future and I have unplugged this solenoid. How will I know the pump is gone other than engine issues?
also will this shorten the life of my oil pump?
gm based video discussing all the same things:
https://youtu.be/-1f1u960I-I
They should also look into adding a sensor and the output via wire to the MB Bosch software that can be viewed via the OBD port and any app like Torque Pro OBDwiz etc via standard ODB2 PID's for oil pressure
Last edited by WRC-LVR; 12-20-2023 at 09:51 AM.
The following users liked this post:
JettaRed (12-20-2023)
#343
Out Of Control!!
Join Date: Jun 2004
Posts: 11,700
Received 2,031 Likes
on
1,418 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
Is this oil pump solenoid in the 2012 M276 V6 as well ? wondering if that plus the oil check valve failures caused the more severe damage to the bottom end bearings upon start up. In my mind, if the pump was stuck on low volume position, that would certainly aggravate the timing issues and lack of oil to the mains and rods on cold start. Plus there are reports of cylinder scoring on the M276 too.....
#344
MBWorld Fanatic!
Join Date: May 2021
Location: Tampa, FL
Posts: 1,963
Received 1,564 Likes
on
981 Posts
2008 E350 (W211 @170K), 2012 ML350 (W166 @119K), 2014 E350 Sport (W212 @96K), 2015 ML350 (W166 @92K)
Is this oil pump solenoid in the 2012 M276 V6 as well ? wondering if that plus the oil check valve failures caused the more severe damage to the bottom end bearings upon start up. In my mind, if the pump was stuck on low volume position, that would certainly aggravate the timing issues and lack of oil to the mains and rods on cold start. Plus there are reports of cylinder scoring on the M276 too.....
I have read here the concern about "oil pump solenoid stuck open". The main problem is its existence at all. These solenoids can "leak pressure" due to grinding with debris in the oil. Once it "leaks pressure" the oil pump will NEVER reach its maximum expected pressure, and we all know where that leads to --> premature WEAR everywhere that hurts: crankshaft, camshafts, HPFP, etc.
Similar solenoids exist in the vehicle in different places, for example AC compressor, and the transmission. However, if the AC solenoid valve sticks we get no cooling, and the max cost may be a compressor, @$1000. If the tranny solenoid sticks, we get either a limp mode or poor shifting around that gear's solenoid. The engine oil sticks open, and we are talking about @$10K->$30K
I still do not understand its presence in the system at all.
Here is a picture of it installed in the pump (S550 photo from Ebay)
Also, this link has a few photo angles for the solenoid (for those who want to meet it)
https://www.pelicanparts.com/More_In...-180-04-15-MBZ
Last edited by juanmor40; 12-20-2023 at 09:49 AM.
The following users liked this post:
CaliBenzDriver (12-20-2023)
#345
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,524
Received 1,601 Likes
on
1,194 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
The following 2 users liked this post by JettaRed:
CaliBenzDriver (12-20-2023),
PeterUbers (12-20-2023)
#346
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,524
Received 1,601 Likes
on
1,194 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
thanks.
also - what if my oil pump fails in the future and I have unplugged this solenoid. How will I know the pump is gone other than engine issues?
also will this shorten the life of my oil pump?
additionally I tried accessing it from the top and I can just touch it but can't see anything - it's all feel. Also my arm got stuck lol soooo will be dropping the pan.
gm based video discussing all the same things:
https://youtu.be/-1f1u960I-I
also - what if my oil pump fails in the future and I have unplugged this solenoid. How will I know the pump is gone other than engine issues?
also will this shorten the life of my oil pump?
additionally I tried accessing it from the top and I can just touch it but can't see anything - it's all feel. Also my arm got stuck lol soooo will be dropping the pan.
gm based video discussing all the same things:
https://youtu.be/-1f1u960I-I
2. I don't think anyone knows if this will affect the life of the oil pump, good or bad. But, why would it? Are these oil pumps prone to failure?
3. Go on a hunger strike until your muscles atrophy enough for you to reach and disconnect the plug without getting your arm stuck. Which is more important anyway? Your health or your engine's health?
The following users liked this post:
PeterUbers (12-20-2023)
#347
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2020
Posts: 1,821
Received 651 Likes
on
448 Posts
04 E55 AMG (totaled), 07 S550 4Matic, 14 E63S
It won't impact oil pump life. If anything it would improve it because of less shavings in the oil from low oil pressure. I do believe we have a vane style oil pump like that Gen V V8.
You need to unplug from bottom. Remove main cover, then remove the front cover. Access is pretty good that way. From the top is not recommended and you'll probably end up snapping some plastic coolant line or something, especially if you have Sasquatch arms.
I think this can only benefit the engine performance and longevity.
You need to unplug from bottom. Remove main cover, then remove the front cover. Access is pretty good that way. From the top is not recommended and you'll probably end up snapping some plastic coolant line or something, especially if you have Sasquatch arms.
I think this can only benefit the engine performance and longevity.
The following 2 users liked this post by kevm14:
CaliBenzDriver (12-20-2023),
PeterUbers (12-20-2023)
#348
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2020
Posts: 1,821
Received 651 Likes
on
448 Posts
04 E55 AMG (totaled), 07 S550 4Matic, 14 E63S
This valve has existed in nearly ALL MB gasoline engines in the last 10 years. See https://mbparts.mbusa.com/oem-parts/...lve-2781800415, and look at all the applications since 2014 (180+)
#349
Out Of Control!!
Join Date: Jun 2004
Posts: 11,700
Received 2,031 Likes
on
1,418 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
Also kudos to @kevm14 for starting this discussion on this subforum, doing the work and reporting back and diligently answering all our questions. This has been one of the most fascinating and likely important mods of this platform.