When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have not waxed the car since I bought it a little over a month ago. It looked like that after a good wash and dry. I have used this - https://majesticsolutions.com/product/spray-shine on all my vehicles and all of them pretty much looked like the pictures I posted. I am sure you can find something comparable where you are or you can order from them online. Certain colors shine better than others but even white shines like that!!
Last edited by KayMJay06; May 10, 2024 at 11:47 PM.
BC Forged HCA162's in brushed dark black 20x10 fronts and 20x11 rears at MAXIMUM W213 offset. I finally nailed the look. Lowered to the low setting on my custom air suspension module for these pictures...will most likely ride at -7mm front and back.
Do any of you using Centric rings (wheels have larger center bore and centric rings making the CB smaller) or all the wheels are hub centric? Any issues with centric rings like vibrations etc?
Here are my new Vossen wheels from Vibe Motorsports (Wheel & Tire Package) and the Specs. I pushed it a little by running 285s in the front, but I have zero rubbing and I'm lowered using the RENNtech Lowering Module. The fitment and look is exactly what I was hoping for. If you have any questions, let me know!
Wheels: Vossen EVO-3, Gloss Brushed Clear, 21x10 ET13 Front 21x11 ET49 Rear
Tires: Michelin Pilot Sport 4S, 285/30R21 Front 305/25R21 Rear
Seriously no rub at 285/30 R21 on the front even at full turn when lowered?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
