Let's See Your Aftermarket Wheels
#51
#54
Former Vendor of MBWorld
No difference, same product, same process.
If you had a matte PAINT on the VEHICLE, then yes I've seen specific products for Satin Clear coats on the car, but not for wheels, just use the same stuff.
The following 7 users liked this post by apsuard:
AB550 (08-23-2023),
Ed99 (07-05-2020),
HappE63s (10-23-2019),
RacerWannabe (02-17-2021),
raudiace4 (02-15-2021),
and 2 others liked this post.
#56
I am looking for 19’s to mount all seasons for winter. It seems like two worlds exist cheap China from Tire Rack etc and really expensive “fancy” rims. I want quality but reasonable price and or OEM. Suggestions would be appreciated.
#57
Super Member
Nice!! No rubbing? My off-sets are not as aggressive, but I still have occasional rubbing in the front where I can feel wear on my protective film under the front well.
The following 3 users liked this post by WhiteKnight16:
#59
#60
Member
Winters. 19” square set-up. Cheap from Tire Rack. You want fancy wheels for winter??
The following users liked this post:
gscroggin (09-19-2021)
#61
Member
The following users liked this post:
WhiteKnight16 (10-25-2019)
The following 8 users liked this post by E63S.Muc:
0-2-60 (03-13-2022),
6speeddave (03-14-2021),
AB550 (08-23-2023),
gscroggin (09-19-2021),
hyperion667 (10-24-2019),
and 3 others liked this post.
#63
MBWorld Fanatic!
Personally the 21.inch size looks so good vs 20’s in the w213 platform.
#64
I have a question for the wheel experts...what is the maximum offset on the W213 E63s? Stock is 25F/55R, which does not leave alot of room for concavity ( deep dish) in the rear.
I have been messing with various offset calculators, but I wanted the members to chime in with what the largest offset is ( meaning the same size wheels with the smaller # of offset).
There are a couple of potential candidate 20 inch sets, but I don't know what is too far out without rubbing. Has anyone experimented?
I have been messing with various offset calculators, but I wanted the members to chime in with what the largest offset is ( meaning the same size wheels with the smaller # of offset).
There are a couple of potential candidate 20 inch sets, but I don't know what is too far out without rubbing. Has anyone experimented?
#65
Member
I have a question for the wheel experts...what is the maximum offset on the W213 E63s? Stock is 25F/55R, which does not leave alot of room for concavity ( deep dish) in the rear.
I have been messing with various offset calculators, but I wanted the members to chime in with what the largest offset is ( meaning the same size wheels with the smaller # of offset).
There are a couple of potential candidate 20 inch sets, but I don't know what is too far out without rubbing. Has anyone experimented?
I have been messing with various offset calculators, but I wanted the members to chime in with what the largest offset is ( meaning the same size wheels with the smaller # of offset).
There are a couple of potential candidate 20 inch sets, but I don't know what is too far out without rubbing. Has anyone experimented?
The following users liked this post:
atl 2 chi (02-09-2021)
#67
that is what I was looking for. If I went to a 10 inch rear would I gain any more? You have a 10.5 with 42.
So the prospect wheels are
20x9 +35 front
20 x10 +32 rear
So the prospect wheels are
20x9 +35 front
20 x10 +32 rear
#68
MBWorld Fanatic!
Join Date: Jul 2013
Location: Toronto, Ont, Canda
Posts: 2,421
Received 698 Likes
on
531 Posts
go fast grocery getter wagon
20x10 et32 could rub. that's more than 23mm extended outward. cannot say for certain.
the front, you are moving the wheel 10mm inward towards the suspension. I don't really prefer it.
the front, you are moving the wheel 10mm inward towards the suspension. I don't really prefer it.
Last edited by bobblehead; 10-23-2019 at 04:04 PM.
#69
I have HRE P101 in exact rear spec but et 12 up front and I could go out another 5 mm but et 10 is safe
The following 10 users liked this post by apsuard:
0-2-60 (03-13-2022),
6speeddave (10-26-2019),
AB550 (08-23-2023),
b0rderman (10-24-2019),
Ed99 (07-05-2020),
and 5 others liked this post.
#71
Specs for wheels
was just wondering if you had any pics of your wheels on the car?
im going aggressive with similar specs to the vossen recommendation you posted (even though you’re not going with those specs), but haven’t seen may wagon setups.
this platform is a lot different than my m3 show car so I want to make sure I don’t have garbage fitment.
thanks in advance for any help or info!
#72
Senior Member
Join Date: Oct 2006
Location: Mansfield, TX and Chicago, IL
Posts: 456
Received 103 Likes
on
74 Posts
Current :2018 E63S and a 2018 GLE 63S . Prior, CLA 250, C450 AMG, 2017 AMG C63S
I did the same for my sedan. Ordered the Vossen Evo-4 in a 21 inch in the Gloss Clear.
Front Wheels: 21x10, Offset 12
Rear Wheels: 21x11, Offset 48
My Michelin PS4S's arrived last week, based on their recs.
Front: 265/30/21
Rear: 305/25/21
Hate that I can't put them on until April/May more than likely with these Chicago winters!
How do you like the 21's? Pix?
Last edited by atl 2 chi; 02-15-2021 at 11:00 PM.
#73
#74
MBWorld Fanatic!
Join Date: Jun 2014
Location: IL
Posts: 1,518
Received 605 Likes
on
345 Posts
19 E63s, 23 M3 compX, B9 SQ5
I'm having some Forged wheels custom made, they recommended doing:
20X10 et 15 Front
and
20x11 et 50 Rear.
Question is, would 20x10 ET 12 be a better/more flush setup? 20x11 ET 50 Rear sounds fine since i plan to run 305s.
20X10 et 15 Front
and
20x11 et 50 Rear.
Question is, would 20x10 ET 12 be a better/more flush setup? 20x11 ET 50 Rear sounds fine since i plan to run 305s.
The following users liked this post:
atl 2 chi (02-17-2021)
#75