When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Question to Mode carbon: What lowering module are you using on your car and what heights do you have it set to?
It looks really good.
That's my E63S and its lowered using the eBay lowering module everyone uses on the forum with 15mm & 12mm spacers. The lowering adjustments are 29mm Front and 37mm Rear
I've been waiting for your long-ago promised install video for the grill piece that shows that the front bumper will not have to be dropped for the install!!
2012 Ferrari FF, 1992 911 C2, 2019 e63s wagon (no longer lives at the Baltimore VPC)
Originally Posted by CALBenzo
I've been waiting for your long-ago promised install video for the grill piece that shows that the front bumper will not have to be dropped for the install!!
I don't get it either. Maybe they just don't care that much about selling this stuff. Like - "I care medium. What's on tv?"
Perhaps they might throw together a low-budget, lofi version for the forum that is password protected on Vimeo...and then finish off the polished marketing piece they are likely working on afterwards.
2012 Ferrari FF, 1992 911 C2, 2019 e63s wagon (no longer lives at the Baltimore VPC)
Originally Posted by b0rderman
Perhaps they might throw together a low-budget, lofi version for the forum that is password protected on Vimeo...and then finish off the polished marketing piece they are likely working on afterwards.
Right! "PM me for the password to the secret video."
I have the grill and the rear spoiler on order for some time now. Apparently the grill is ready to ship but as I am in Australia I would rather wait for the rear spoiler to be ready as well before shipping. I have previously fitted the Carbon front grill to a C63S Coupe and it needed to be rubbed back and sprayed with several coats of clear to bring it up to scratch and was then fitted. It came out very well.
I am told by Sam of Mode Carbon that the new CF parts are of a much higher quality so I look forward to receiving them for my W213 E63S. I will post photos when the parts are fitted.
In the meantime I will post photos of the C63S front grill.
I've been waiting for your long-ago promised install video for the grill piece that shows that the front bumper will not have to be dropped for the install!!
I will speak with a shop that will be installing the Grille this week and see if they can help.
Originally Posted by VPC_E63S
I don't get it either. Maybe they just don't care that much about selling this stuff. Like - "I care medium. What's on tv?"
Originally Posted by b0rderman
Perhaps they might throw together a low-budget, lofi version for the forum that is password protected on Vimeo...and then finish off the polished marketing piece they are likely working on afterwards.
We've asked for video from a couple of shops that had access to the Grille without any success.
Originally Posted by AMG SK
I have the grill and the rear spoiler on order for some time now. Apparently the grill is ready to ship but as I am in Australia I would rather wait for the rear spoiler to be ready as well before shipping. I have previously fitted the Carbon front grill to a C63S Coupe and it needed to be rubbed back and sprayed with several coats of clear to bring it up to scratch and was then fitted. It came out very well.
I am told by Sam of Mode Carbon that the new CF parts are of a much higher quality so I look forward to receiving them for my W213 E63S. I will post photos when the parts are fitted.
In the meantime I will post photos of the C63S front grill.
Your order has been shipped and we appreciate the opportunity to work with you again.
Where can i buy this full kit and how much can you pm me please
W213 E63(S) Sedan Carbon Fibre Collection by Mode Carbon
Technology:
Our W213 E63s Collection is manufactured to the highest standard of quality, using our Prepreg composite process. Prepreg is the common term for fabric reinforcement that has been pre-impregnated with a resin system. The resin system is an epoxy and already includes the proper curing agent. As a result, it's ready to lay into a mold without the addition of resin or the steps required of a typical hand lay-up. This yields a near-perfect epoxy resin content, maximizing strength properties for the reinforcement
100% Carbon Fiber:
All raw materials used in our manufacturing are hand-picked from Germany, France and Japan to ensure that our carbon fiber products exceed even the most strict industry standard of quality.
The carbon fiber is finished with UV protected clear coat to prevent discoloration from sun exposure. The glossy finish not only provides stunning aesthetics, but also serves to maximize the longevity of our products by increasing their durability to the elements.
The Result:
Our commitment to quality is high-grade carbon fiber that increases performance and improves aesthetics. Whether your car is for the street or dedicated to track use, Mode Carbon products offer an ample blend of quality, refinement and style.
*All items are complete replacement pieces. They are NOT covers that go on top of the existing factory pieces. All items utilize OEM mounting points and hardware, no drilling required. Professional installation highly recommended.
What is the grill price and what are the installation instructions?
Originally Posted by Mode Carbon
W213 E63(S) Sedan Carbon Fibre Collection by Mode Carbon
Technology:
Our W213 E63s Collection is manufactured to the highest standard of quality, using our Prepreg composite process. Prepreg is the common term for fabric reinforcement that has been pre-impregnated with a resin system. The resin system is an epoxy and already includes the proper curing agent. As a result, it's ready to lay into a mold without the addition of resin or the steps required of a typical hand lay-up. This yields a near-perfect epoxy resin content, maximizing strength properties for the reinforcement
100% Carbon Fiber:
All raw materials used in our manufacturing are hand-picked from Germany, France and Japan to ensure that our carbon fiber products exceed even the most strict industry standard of quality.
The carbon fiber is finished with UV protected clear coat to prevent discoloration from sun exposure. The glossy finish not only provides stunning aesthetics, but also serves to maximize the longevity of our products by increasing their durability to the elements.
The Result:
Our commitment to quality is high-grade carbon fiber that increases performance and improves aesthetics. Whether your car is for the street or dedicated to track use, Mode Carbon products offer an ample blend of quality, refinement and style.
The Collection:
Front Lip Insert
Front Canard Insert
Carbon Fiber Grille
Mirror Housings
Bootlid Spoiler
*All items are complete replacement pieces. They are NOT covers that go on top of the existing factory pieces. All items utilize OEM mounting points and hardware, no drilling required. Professional installation highly recommended.