W213 E63s RMS Leak




Is your car modified at all?
Last edited by SnoopLevine; Mar 7, 2023 at 10:34 AM.
Trending Topics




With the M156 engine, there's aftermarket oil air separators/catch cans that run the blowby through the oem PCV valve and back to the intake manifold. However, I don't currently see something similar being sold specific to the M177 LS2. I think the smart thing to do on these cars is to inspect underneath for an oil leak, if you don't see anything - thank god - and then throw a new set of oil separators on the car.
The Best of Mercedes & AMG








But mine took exactly 1 month because of waiting for parts here and there and it was over the Christmas and New Year holidays.




mine failed at 5 yrs mark with 100,000km as i daily drive it
Last edited by bobblehead; Mar 12, 2023 at 09:00 PM.
Removing the factory separators and replacing with an aftermarket catch can would be one option. Or opening up the MB separators and modifying the internals by removing check valves and filters. Problem is the separators appear to be blow molded plastic and these could be hard to reassemble once taken apart. Someone will figure something out.
Last edited by chassis; Mar 13, 2023 at 02:39 AM.





