19" wheels
10-25-2002, 11:03 PM
#1
Almost a Member!
Thread Starter
Join Date: Jul 2002
Location: indiana
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
98 e320 , 99 lexus rx300
19" wheels
Hi, I have a 98 e320 with 18"amg wheels and was wondering if I put 19" wheels on the car, will I have a problem with rubbing when turning? I here different opinions on this. When I bought these from Tirerack, they said that the 18" may rub. Any opinions?
10-26-2002, 01:18 AM
#2
Out Of Control!
Scott
Go with 19"s. For the tires you'll need 245/35/19F and 275/30/R. Definitely no rubbing on these just make sure you get the correct width and et on the wheels when you get them. Also call Peter @ www.wheelexpert.com and he can help you out!
Go with 19"s. For the tires you'll need 245/35/19F and 275/30/R. Definitely no rubbing on these just make sure you get the correct width and et on the wheels when you get them. Also call Peter @ www.wheelexpert.com and he can help you out!
10-26-2002, 11:29 PM
#5
Out Of Control!
Originally posted by Tezta
But james, didnt you have Pete roll your fenders?
But james, didnt you have Pete roll your fenders?
No fender rolling needed at all on this setup. If i were to have used a 285's on the rear then i might have to roll my fenders even more. My fender is already rolled when it came from the factory.
10-26-2002, 11:30 PM
#6
Out Of Control!
Re: 19"
Originally posted by scottamg
I don't want to go with the expense of having the fenders rolled. please let me know!!!
I don't want to go with the expense of having the fenders rolled. please let me know!!!
If you use the sizes i recomended above you won't need to roll your fenders.
10-27-2002, 08:20 AM
#7
MBWorld Fanatic!
Join Date: May 2002
Location: Hong Kong / Jakarta
Posts: 3,216
Likes: 0
Received 0 Likes
on
0 Posts
CLS350
Originally posted by JamE55
Tezta
No fender rolling needed at all on this setup. If i were to have used a 285's on the rear then i might have to roll my fenders even more. My fender is already rolled when it came from the factory.
Tezta
No fender rolling needed at all on this setup. If i were to have used a 285's on the rear then i might have to roll my fenders even more. My fender is already rolled when it came from the factory.
Trending Topics
10-27-2002, 04:29 PM
#9
Out Of Control!
Originally posted by Tezta
Oh man i must be losing my mind, i totally forgot that you had an E55.:o
Oh man i must be losing my mind, i totally forgot that you had an E55.:o
NNNNNooooo pls don't loose your mind over this. Maybe i'll just take my wheels off and put it back to stock if that'll help you not loose your mind??? LOL!!!!!
10-28-2002, 12:14 AM
#10
MBWorld Fanatic!
Join Date: May 2002
Location: Hong Kong / Jakarta
Posts: 3,216
Likes: 0
Received 0 Likes
on
0 Posts
CLS350
Originally posted by JamE55
Tezta
NNNNNooooo pls don't loose your mind over this. Maybe i'll just take my wheels off and put it back to stock if that'll help you not loose your mind??? LOL!!!!!
Tezta
NNNNNooooo pls don't loose your mind over this. Maybe i'll just take my wheels off and put it back to stock if that'll help you not loose your mind??? LOL!!!!!
. So whats new with phase II?
10-28-2002, 10:32 PM
#11
Out Of Control!
Originally posted by Tezta
So whats new with phase II?
So whats new with phase II?
