Wheels Fitment on 2007 E63 AMG
07-21-2008, 07:53 PM
#1
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Wheels Fitment on 2007 E63 AMG
Does anyone know what will be the most aggressive fitment on the E63?
Looking at this 20" iforged IMOLA wheels
or
Evolution
Wondering can E63 get 5 inch lip in the rear.
Looking at this 20" iforged IMOLA wheels
or
Evolution
Wondering can E63 get 5 inch lip in the rear.
07-21-2008, 09:30 PM
#2
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
Cedric,
The best thing to do is to call Vince at Iforged direct and tell him what you want to do...then tell him you will pay cash for the deal to so that he does not send you to a dealer of his wheels. Cash only. This is the only way you will get what you want for the right price. Because once you try to go with custom sizes and offsets you will be ripped off by his distributors.
The best thing to do is to call Vince at Iforged direct and tell him what you want to do...then tell him you will pay cash for the deal to so that he does not send you to a dealer of his wheels. Cash only. This is the only way you will get what you want for the right price. Because once you try to go with custom sizes and offsets you will be ripped off by his distributors.
07-21-2008, 09:44 PM
#3
Senior Member
Join Date: Nov 2006
Location: San Diego
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
My Radenergie R10 20x10 had an offset of 31mm. I had to shave 3mm off the wheel and still had problems running 285/25/10 Falken FK452 tires. Only after some aggressive rolling of the fenders did it fit.
07-21-2008, 10:22 PM
#4
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
Cedric,
You should follow Joe ( vegastrashed ) advise because his E63's look is what I think you should try to achieve.
And like he said....aggressive fender rolling is the only way you will achieve an aggressive fit....that's what I did also.
You should follow Joe ( vegastrashed ) advise because his E63's look is what I think you should try to achieve.
And like he said....aggressive fender rolling is the only way you will achieve an aggressive fit....that's what I did also.
07-21-2008, 10:22 PM
#5
MBWorld Fanatic!
Join Date: Sep 2007
Location: South Carolina
Posts: 2,069
Likes: 0
Received 3 Likes
on
3 Posts
2005 E55 ///AMG
Do some checking around on Iforged also. Have read of more than one instance with serious issues regarding quality control. For the price of Iforged, you can usually get DPEs or even slightly used HREs.
07-21-2008, 10:32 PM
#6
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Bro, what is involve in fender rolling. Do I need to have a body shop to do that? When we gonna meet ? Pasadena? hahahahaha
07-22-2008, 12:17 AM
#7
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
Trending Topics
07-22-2008, 02:45 AM
#8
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Air Intake?
wow, cool video.
Also I was checking this ebay seller "gr8truth2z"
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230272671096&ssPageNam e=ADME
:RTQ:MOTORS:1123
He is selling this Air intake. Then I ask him how do you install this thing on the new E63 AMG engine, he said " Also the E 63 & Kompressor have the same Body
so these are the correct pipes & connectors for the E63. I can
forward some photo's to help persuade you. If you are ready
with CASH, I can send an installer to you by the end of the week. "
I wonder if this will improve or gain any HP. Does anyone know?
Also I was checking this ebay seller "gr8truth2z"
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230272671096&ssPageNam e=ADME
:RTQ:MOTORS:1123He is selling this Air intake. Then I ask him how do you install this thing on the new E63 AMG engine, he said " Also the E 63 & Kompressor have the same Body
so these are the correct pipes & connectors for the E63. I can
forward some photo's to help persuade you. If you are ready
with CASH, I can send an installer to you by the end of the week. "
I wonder if this will improve or gain any HP. Does anyone know?
07-22-2008, 03:09 AM
#9
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
wow, cool video.
Also I was checking this ebay seller "gr8truth2z"
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230272671096&ssPageNam e=ADME:RTQ:MOTORS:1123
He is selling this Air intake. Then I ask him how do you install this thing on the new E63 AMG engine, he said " Also the E 63 & Kompressor have the same Body
so these are the correct pipes & connectors for the E63. I can
forward some photo's to help persuade you. If you are ready
with CASH, I can send an installer to you by the end of the week. "
I wonder if this will improve or gain any HP. Does anyone know?
Also I was checking this ebay seller "gr8truth2z"
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230272671096&ssPageNam e=ADME
:RTQ:MOTORS:1123He is selling this Air intake. Then I ask him how do you install this thing on the new E63 AMG engine, he said " Also the E 63 & Kompressor have the same Body
so these are the correct pipes & connectors for the E63. I can
forward some photo's to help persuade you. If you are ready
with CASH, I can send an installer to you by the end of the week. "
I wonder if this will improve or gain any HP. Does anyone know?
Cedric,
Honestly...This intake looks like all it will do is suck in hot air from your engine bay and you will lose HP.
07-22-2008, 03:17 AM
#10
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Air intake
Bro, I thought the same. Since I don't know much about this stuffs. I gotta ask for opinion. Thanks man hahahahaha. He is ripping people off.
When are you going to be in Pasadena area? Lunch? hahahaha
When are you going to be in Pasadena area? Lunch? hahahaha
07-22-2008, 12:26 PM
#12
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
07-22-2008, 01:40 PM
#13
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
That G35 has a custom widebody kit and the rear wheels are 22" x 12 or 13 ... they are not 20's....I read about this car.
Last edited by CLK FAN; 07-22-2008 at 01:43 PM.
07-22-2008, 01:42 PM
#14
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
07-22-2008, 01:43 PM
#15
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
If you really want to go wide and very aggressive like my set up we need to meet up so I can connect you with a guy who will help you because aggressive fender rolling may not be what you need or want, you will need your fenders flared and pulled to achieve the look I know you want. This guy I know will probably charge you $300 to do both rear fenders to your taste but you need the wheels first so he can work around them to make them fit.
07-22-2008, 01:47 PM
#16
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Bro when we going to have lunch? There is one nice cafe in Arcadia.
I buy Lets go !
If you really want to go wide and very aggressive like my set up we need to meet up so I can connect you with a guy who will help you because aggressive fender rolling may not be what you need or want, you will need your fenders flared and pulled to achieve the look I know you want. This guy I know will probably charge you $300 to do both rear fenders to your taste but you need the wheels first so he can work around them to make them fit.
I buy Lets go !
If you really want to go wide and very aggressive like my set up we need to meet up so I can connect you with a guy who will help you because aggressive fender rolling may not be what you need or want, you will need your fenders flared and pulled to achieve the look I know you want. This guy I know will probably charge you $300 to do both rear fenders to your taste but you need the wheels first so he can work around them to make them fit.
07-22-2008, 04:27 PM
#17
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Wheels Fitment on 2007 E63 AMG
Got a reply from iforged. He said for the following wheel 20". If I can flare out each side 2" inches I can get 6" rear lip.
If you really want to go wide and very aggressive like my set up we need to meet up so I can connect you with a guy who will help you because aggressive fender rolling may not be what you need or want, you will need your fenders flared and pulled to achieve the look I know you want. This guy I know will probably charge you $300 to do both rear fenders to your taste but you need the wheels first so he can work around them to make them fit.
If you really want to go wide and very aggressive like my set up we need to meet up so I can connect you with a guy who will help you because aggressive fender rolling may not be what you need or want, you will need your fenders flared and pulled to achieve the look I know you want. This guy I know will probably charge you $300 to do both rear fenders to your taste but you need the wheels first so he can work around them to make them fit.
07-22-2008, 04:51 PM
#18
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
If this is so then we can talk to my guy and tell him what you want to do, but he likes to work with a wheel already on the car so he can make it work with no issues the first time. You would have to buy the wheels first and go to him with the wheels and have him do the job, I'm sure it would look incredible.
07-22-2008, 04:53 PM
#19
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
Wheels Fitment on 2007 E63 AMG
Great, at least we know it will work. I will shop around for wheels now 
If this is so then we can talk to my guy and tell him what you want to do, but he likes to work with a wheel already on the car so he can make it work with no issues the first time. You would have to buy the wheels first and go to him with the wheels and have him do the job, I'm sure it would look incredible.
If this is so then we can talk to my guy and tell him what you want to do, but he likes to work with a wheel already on the car so he can make it work with no issues the first time. You would have to buy the wheels first and go to him with the wheels and have him do the job, I'm sure it would look incredible.
07-22-2008, 05:04 PM
#21
Member
Thread Starter
Join Date: Dec 2002
Location: L.A.
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
2007 E63 AMG
07-31-2008, 05:22 PM
#22
Newbie
Join Date: Jul 2008
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
manufacturer
Hey Cedric1031,
I'm new to the forum and just became a sponsor. Just wanted to let you know we did an 06 E63 AMG not long ago with our split-5 CO1 model. You can check it out in our Lounge section www.bredenforged.wordpress.com. Scroll to the bottom of the page to see the E63. The fitments we did was 20"x8.5" (f) and 20x10" (r) because the customer didn't want to roll his fenders. You can get an extra .5" by rolling them and more if you flare.
We also have a similar wheel to the IMOLA which is our CO4. You can see that at our main website www.bredenforged.com. I haven't had a chance to upload CO4 pics to the lounge yet, but have some if you want to see samples.
Also you can choose the Reversed Rivet concept with all our models.
Let me know what you think. ec
I'm new to the forum and just became a sponsor. Just wanted to let you know we did an 06 E63 AMG not long ago with our split-5 CO1 model. You can check it out in our Lounge section www.bredenforged.wordpress.com. Scroll to the bottom of the page to see the E63. The fitments we did was 20"x8.5" (f) and 20x10" (r) because the customer didn't want to roll his fenders. You can get an extra .5" by rolling them and more if you flare.
We also have a similar wheel to the IMOLA which is our CO4. You can see that at our main website www.bredenforged.com. I haven't had a chance to upload CO4 pics to the lounge yet, but have some if you want to see samples.
Also you can choose the Reversed Rivet concept with all our models.
Let me know what you think. ec
