joesc230

Hi all,

I have HRE wheels that fit a C32 AMG. I am selling them and the guy that wants to buy them has a E55. Does anyone know if they will fit? I'm not sure of the offset and bolt pattern needed for the E55, and don't know what the C32's typical offset and bolt pattern are (since that is what the HREs were made for)...anyone know??

Thanks a lot!

joesc230

Anyone??

I'd really appreciate some info!! Thanks!

gswc32

They might. See the attached application guide for Mandrus wheels. Since HRE are custom, you need to know the offsets.

lkchris

It's pretty likely your C-class uses 12 mm wheel bolts.

For sure the W211 uses 14 mm wheel bolts. This means the bolts he needs won't go through the wheels.

Of course if you're talking about a W210, then that's different but then you didn't specify, did you?

Hokie1200

I am currently pulling my hair out trying to get HRE's made for a C240 to fit on a C230 Sport (front caliper clearance, spacer, lugbolts). I am pretty sure the lugbolts for C, CLK, and SLK are 12x1.5 while the E and larger classes use 14x1.5. I am sure both cars have large AMG calipers, but are the E55's larger? Guess my opinion is the C32 wheels would not be recommended on an E55.

Luke@tirerack

and the C32 wheel would not have the proper load capacity for the E55