Barock 16" 3 pc split wheels
I stumbled in this picture and i really wanted set of those.

I knew those are custom made, so i decided to put a BBS RS 16" 1" wide lip on my severe damaged ATS barocks. And surprisingly it works!


So i took my wheels to nearest metalwork and they did their magic and this is how they were yesterday. I'm going to build them from BBS RS 8 & 10x16 wheels. but i don't have them yet. Here in finland we have now 2 feet snow and -30c, so no rush for summertires.



I think this is worthy first post!
Last edited by SergeyPRKL; Jan 6, 2010 at 12:14 PM.
SUNNY 195/45/16 tires from http://www.camskill.co.uk
now they are benchmarked, so today i know that they will fit perfectly on GOLF mk3 but hey, my golf is running up north and there's soon snowseason so they are now where they belong... MB W123
What i know for sure, is that the rear wheels will fit perfectly front and i need to put the front wheels again to pieces and take off the 1" lip and buy two 3 or 4 inch lips and then put them rear. SO they won't fit perfectly on a merc in current setup. it helps that i have spacers, rear 25mm/1" and front 15mm/0,6".
It's a good start.



I can't really use a camera
Trending Topics
The Best of Mercedes & AMG
thank you
Selling this custom built set of Barock Wheels















They are 17X8,5 ET28 5x112 CB 66,6
Forged 2,0 inch lips - high gloss polished
Forged 6,0 inch inner barels - powdercoated in silver metalic
BBS RS nickel plated bolts, zinc plated nuts
Centers painted in silver metalic with a little pearl
Running straight and true, no cracks or welds or anything.
Thank you
Selling this custom built set of Barock Wheels















They are 17X8,5 ET28 5x112 CB 66,6
Forged 2,0 inch lips - high gloss polished
Forged 6,0 inch inner barels - powdercoated in silver metalic
BBS RS nickel plated bolts, zinc plated nuts
Centers painted in silver metalic with a little pearl
Running straight and true, no cracks or welds or anything.
Thank you
Selling this custom built set of Barock Wheels















They are 17X8,5 ET28 5x112 CB 66,6
Forged 2,0 inch lips - high gloss polished
Forged 6,0 inch inner barels - powdercoated in silver metalic
BBS RS nickel plated bolts, zinc plated nuts
Centers painted in silver metalic with a little pearl
Running straight and true, no cracks or welds or anything.




