Sway Bar recommendation for 01 E430
Thread Starter
MBWorld Fanatic!
Joined: Jan 2002
Posts: 1,810
Likes: 0
From: SFV, Ca.
W210, W220, W163, W164, C6
Sway Bar recommendation for 01 E430
Can anyone provide some recommendation on sway bar upgrades on my 2001 E430.
My set-up consists of:
Brabus springs (1) coil cut
OEM shocks
What should I expect with upgraded sway bars??
Thanks
Richard
My set-up consists of:
Brabus springs (1) coil cut
OEM shocks
What should I expect with upgraded sway bars??
Thanks
Richard
![Turbo]['s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23b53a52' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>T</text></svg>)
Senior Member
Joined: Nov 2001
Posts: 342
Likes: 0
From: So.Cal
98 E430
a stiffer ride, and most of all, you lose alot of the body rolls.
I am also looking in to replacing my sway-bars, but the only manufacture I know that have a full set for the E430 is Eibach. I believe it's around $400. Or you can get the bars off of a E55.
Not sure which other manufacture have them available immediately. H&R should have their set out by Summer.
I am also looking in to replacing my sway-bars, but the only manufacture I know that have a full set for the E430 is Eibach. I believe it's around $400. Or you can get the bars off of a E55.
Not sure which other manufacture have them available immediately. H&R should have their set out by Summer.
Thread Starter
MBWorld Fanatic!
Joined: Jan 2002
Posts: 1,810
Likes: 0
From: SFV, Ca.
W210, W220, W163, W164, C6
Turbo][
I had spoken to Sander@ TWS...his recommendation was to replace my OEM shocks first with Bilstein sports and then upgrade the sway bars if needed. He sells Brabus sway bars for $500 + install.
Bilstein vs Koni...what are your impressions??
Also, did you ever get in touch w/Randall in regards to the BMC CDA?? I'm still awaiting mine.
Richard
Bilstein vs Koni...what are your impressions??
Also, did you ever get in touch w/Randall in regards to the BMC CDA?? I'm still awaiting mine.
Richard
