Mark this thread as Unsold
**New Arrivals from PowerWheels Pro**
#1
Former Vendor of MBWorld
Thread Starter
**New Arrivals from PowerWheels Pro**
We are excited to bring some new stock and new designs over:
For the W204 guys that have higher offsets we currently have some 40mm offset wheels as the 35mm have a very aggressive look to them sticking out too much for some tastes. The 40mm will tuck them in by 5mm which is very noticeable.
In detail all the below are in 35mm:
E63 style 810: 18x8.5/9.5 - 19x8.5/9.5
Renntech style 805 18x8.5 - 19x8.5/9.5
SLR style 804: 19x8.5/9.5
W204 C63 style 814: 18x8.5
SL63 AMG style 817: 19x8.5/9.5
Stock E-Class style 812: 18x8.5
SL65 style 818: 17x8
Brabus style 801 in Silver Machined Face 18x8.5/9.5
And the below in 40mm:
SL65 style 818: 17x8
SL63 AMG style 817: 17x8
For the W204 guys that have higher offsets we currently have some 40mm offset wheels as the 35mm have a very aggressive look to them sticking out too much for some tastes. The 40mm will tuck them in by 5mm which is very noticeable.
In detail all the below are in 35mm:
E63 style 810: 18x8.5/9.5 - 19x8.5/9.5
Renntech style 805 18x8.5 - 19x8.5/9.5
SLR style 804: 19x8.5/9.5
W204 C63 style 814: 18x8.5
SL63 AMG style 817: 19x8.5/9.5
Stock E-Class style 812: 18x8.5
SL65 style 818: 17x8
Brabus style 801 in Silver Machined Face 18x8.5/9.5
And the below in 40mm:
SL65 style 818: 17x8
SL63 AMG style 817: 17x8
#3
Super Member
Join Date: Apr 2009
Location: Chicago suburbs
Posts: 552
Likes: 0
Received 11 Likes
on
9 Posts
2004 E55 AMG
Just wanted to say that I bought a set of wheels from Powerwheelspro last month, and they are fantastic! They look great, and even though there was a shipping mix-up, the guys were on top of it and provided exceptional customer service! Here's a pic of the new wheels:
#5
Former Vendor of MBWorld
Thread Starter
@LAMB09: TWe have two Brabus style wheels, our 801s Monoblock and the Black Machined face ones right above the Monoblocks above. The 801s are $589 for the staggered set 18x8.5/9.5.
izzyz28: Thanks for the good words! We strive to offer great service to match our awesome product. You will enjoy these wheels for years!
wadgras44: Unfortunately no luck yet on the W204 offset on the 18s, the factory has not made them yet.
We will keep on pushing. We got the 17s in 40mm which should tuck them in quite a bit.
Thanks,
Vassili
izzyz28: Thanks for the good words! We strive to offer great service to match our awesome product. You will enjoy these wheels for years!
wadgras44: Unfortunately no luck yet on the W204 offset on the 18s, the factory has not made them yet.
We will keep on pushing. We got the 17s in 40mm which should tuck them in quite a bit.
Thanks,
Vassili
Trending Topics
#14
Former Vendor of MBWorld
Thread Starter
Actually,
You can pull off the Mercedes emblem and put a Audi or VW over it. If you just pull off the emblem, you will have the little holes where the tri star was and it does not look so good
You can pull off the Mercedes emblem and put a Audi or VW over it. If you just pull off the emblem, you will have the little holes where the tri star was and it does not look so good
#15
Former Vendor of MBWorld
Thread Starter
@WaveyKat: The 810 are available in 18x8.5/9.5 and they weight about ~24lbs. The C63 814s are currently in stock in 18x8.5. In terms the offset these are 35mm. Not sure which C class you have so don't know if they will fit.
@TCM GLX: We have the S65 AMG 808 in 20z8.5/9.5 43mm and the Brabus in 20x8.5 also 43mm.
@HellsAngel: Unfortunately the factory only makes those sporadically and they are hard to get by.
@FormulaZR: Unfortunately the factory doesn't currently have the mold for these. We will put the request in though.
@boardernr: We will check with the factory. We just got the E63 the SLRs and the Renntech in 19" in. Not sure when they would be ready though.
@Bollywood: You can actually separate the chrome ring from the centercap so you could have a blank cap covering the hole.
Thanks,
@TCM GLX: We have the S65 AMG 808 in 20z8.5/9.5 43mm and the Brabus in 20x8.5 also 43mm.
@HellsAngel: Unfortunately the factory only makes those sporadically and they are hard to get by.
@FormulaZR: Unfortunately the factory doesn't currently have the mold for these. We will put the request in though.
@boardernr: We will check with the factory. We just got the E63 the SLRs and the Renntech in 19" in. Not sure when they would be ready though.
@Bollywood: You can actually separate the chrome ring from the centercap so you could have a blank cap covering the hole.
Thanks,
#17
Super Member
Thank you very much, sir! I also appreciate the Lorinser LM6 reps being available in staggered 19...I will probably be placing an order on those soon.
#18
Former Vendor of MBWorld
Thread Starter
TCM GLX: Yes, the are actually awesome looking wheels. Beautiful detail on them. The fronts and the rears appear to be the same:
FormulaZR: You are very welcome, sir! We do have 3 sets of the Lorinsers. We are getting the 18x in 18x8.5 in 5-6 weeks as well.
Regards,
Vassili
FormulaZR: You are very welcome, sir! We do have 3 sets of the Lorinsers. We are getting the 18x in 18x8.5 in 5-6 weeks as well.
Regards,
Vassili
#20
Former Vendor of MBWorld
Thread Starter
The 810s do not seem to have any concavity difference between the fronts and rears.
Here are a couple of shots and a few from a customer with the 18x8.5/9.5:
Here are a couple of shots and a few from a customer with the 18x8.5/9.5: