Mark this thread as Unsold
--------------------------------------------------------------------------------
M12x1.5 thread, R12 ball seat, 45 mm shank, 17 mm hex head, oem on w203/cl203, clk(208,209), using w 5 mm spacers, thanx, mike, pm me
M12x1.5 thread, R12 ball seat, 45 mm shank, 17 mm hex head, oem on w203/cl203, clk(208,209), using w 5 mm spacers, thanx, mike, pm me
Member
here is the link that may help you and they having a sale too.
http://www.ezaccessory.com/Ball_Seat_Type_s/39.htm
http://www.ezaccessory.com/Ball_Seat_Type_s/39.htm
thanx vince,, but which ones do i need?? oem shanks is 39 mm , so add 5mm would be 44mm, but i dont see it listed ????
MBWorld Fanatic!
I run 5m spacers in the back but dont have lengthened bolts and i'm fine.
I have 10mm up front which i use 50mm bolts
Are your wheels require a conical or ball seat?
I have 10mm up front which i use 50mm bolts
Are your wheels require a conical or ball seat?
bump
MB World Stories
The Best of Mercedes & AMG
ExploreSuper Member
check out my FS link and tell me if it will help u...will give it for real cheap.................
Currently Active Users (1)


