michael66899

Selling a set of 5x112 Fikse FM10 fully forged three piece custom wheels. These are very rare set of wheels and are super strong and lightweight at around 17lbs, if you know anything about Fikse you know what these are all about. These wheels cost $1000 a piece brand new. They are in great condition with absolutely no curbage, bends, or cracks on any of the wheels. Fronts are 18x8 ET 38 and rears are 18x9.5 ET42. Tires are Yokohama AVS, 225/40/18s up front and 265/35/18 out back with about 70% tread. I'll sell them for $2700 with tires and $2300 without. Just two wheels pictured, I'll have better ones tomorrow.

pww

Trade?

https://mbworld.org/forums/wheels-ti...ed-feeler.html

michael66899

Cash only, sorry.

559EVO

Offsets and location please?

michael66899

Located in Bellingham, WA (North of Seattle), and I'll have definite offsets for you tomorrow but I believe the fronts are ET35 and the rears ET30 but I'm not 100% sure.

michael66899

After further inspection the rears look to actually be 9.5in. wide ET42 and the fronts are ET38.

VeeDubbVR6

Love me some Fiske's!! Ran 18" FM5's on the M3 for a while.

But just incase you're not aware, if these were built for Audi fitment, the centerbore won't work with BenzO's (too small)...might want to measure that or look into it a bit.

I wish I had some extra cash laying around, I'd buy them off you if they'd fit!..local too!

michael66899

Thanks for the heads up, these were originally built for a merc so they do have the larger 66.6mm center bores.

VeeDubbVR6

nice!

Dan Wang

This isn't completely true, depending on which Audi and MB you are comparing.

On a W211 the center bore is 66.5mm also just like on an Audi S4.

VeeDubbVR6

good to know, thanks!

michael66899

All Audis utilize a 57.1mm center bore up to 2008 when they switched to the 66.6.

michael66899

$2200 without tires, $2600 with, prices do not include shipping. I just had the lips touched up as they had some nicks on them, there are some very minor nicks in the clearcoat on the centers and some dirt buildup at the end of the spokes as seen in the picture, other than that these are flawless, here are some more pics.

michael66899

$2400 with tires, $2000 without.

tradin1

will they fit an 06 e55 amg?

michael66899

They should however I can not guarantee it as I have never tried. The only issue you might have is caliper clearance in the front with those big brembos, however a small spacer will take care of that.

michael66899

$2200 with tires, $1900 without.

michael66899

Up.

michael66899

Up.

97W202

beautiful wheels GLWS

michael66899

Thanks, also Fikse were able to dig up the specs on these wheels and the fronts are actually ET32 and the rears are ET19.

sick430

can you please post pics of the inside of the rears. that rear offset is killing me, thanks GLWS if i could get it up to 30 then i could make it work!

michael66899

I'll take some pics here in a minute, what exactly is it that your looking to see? The offsets are not stamped anywhere on the wheels, I had to contact Fikse and give them the serial number to get the offsets. From my measurements the rears seem to be closer to ET30 however I didn't have a very accurate measuring system and the published offset in their records are ET19. These wheels were made before Fikse switched ownership so they may be incorrect but I can't be sure. I'll try to remeasure them today and see what I come up with. Also are they any specific dimensions that might help you? Let me know, thanks.

dlbehrns

If I understand offset correctly, the lower the offset the further out the rim, no? so adding spacers would push the rims out evern further, no?

B. Gorman

Correct!!!!