Mark this thread as Unsold
18" BBS LM reps $529 NEW from Powerwheelspro
#30
Hi vnarma, Unfortunately the black ones are only available in square fitment 18x8.5. But you could stagger the tires on non staggered wheels. Lots of people have done that, including myself on my personal car.
I am not sure if the 42mm offset on the 8.5" rim would clear your brakes or if you would have to run any spacers in the front.
Pms replied.
Thank you
I am not sure if the 42mm offset on the 8.5" rim would clear your brakes or if you would have to run any spacers in the front.
Pms replied.
Thank you
#31
Do you have a set that will fit a 2010 E63 non-PP?
I believe the sizes I need are,
18x9 ET37
18x9.5 ET52
Correct me if I'm wrong.
These will be for the track so I would rather go up in width than down as long as they fit.
I believe the sizes I need are,
18x9 ET37
18x9.5 ET52
Correct me if I'm wrong.
These will be for the track so I would rather go up in width than down as long as they fit.
#32
Hi RossN,
You are right about the offsets. The thing is that with any wheel with as big of a lip as these, 2" and big brakes like your car has you can't use the stock offsets. Reason being the tips of the spoke start 2" inboard the rim so it doesn't give enough room to flare out on the back of the spoke and clear the brake calipers.
I would recommend the 20mm offset, if you want we can send you one front wheel and you could check the caliper clearance. If it works and you like them we can send you the other 3.
The same holds for the rears, we recommend the 35mm offset. The widths are a bit different too than the ones you posted, they are 8.5 F and 9.5 R It should work for the tire widths you run, no?
Regards,
You are right about the offsets. The thing is that with any wheel with as big of a lip as these, 2" and big brakes like your car has you can't use the stock offsets. Reason being the tips of the spoke start 2" inboard the rim so it doesn't give enough room to flare out on the back of the spoke and clear the brake calipers.
I would recommend the 20mm offset, if you want we can send you one front wheel and you could check the caliper clearance. If it works and you like them we can send you the other 3.
The same holds for the rears, we recommend the 35mm offset. The widths are a bit different too than the ones you posted, they are 8.5 F and 9.5 R It should work for the tire widths you run, no?
Regards,
#34
Hi driftmotion,
We do have these wheels in the more aggressive offsets for your C63. They are the 35mm offset front and 40mm rears.
The offset is lower than other wheels to accommodate the wider lip on the wheels.
The wheels will work with your stock bolts and they are TPMS compatible.
Thank you,
We do have these wheels in the more aggressive offsets for your C63. They are the 35mm offset front and 40mm rears.
The offset is lower than other wheels to accommodate the wider lip on the wheels.
The wheels will work with your stock bolts and they are TPMS compatible.
Thank you,
#38
Hi Benzaddict32,
The C32 has a special fitment due to the low offset it takes from the factory.
My advise is to go with the 20mm silver ones which are confirmed to work without any modifications. It is easier to paint the silver to black in this case. Reason being that the wheels in 8.5" wide which barely fits in the front. If you use a 15m spacer to push them out and clear your brakes, the wheel will be poking out past the fender. Not sure if you like that look, just want to share my experience with those wheels and W202s
Thanks
The C32 has a special fitment due to the low offset it takes from the factory.
My advise is to go with the 20mm silver ones which are confirmed to work without any modifications. It is easier to paint the silver to black in this case. Reason being that the wheels in 8.5" wide which barely fits in the front. If you use a 15m spacer to push them out and clear your brakes, the wheel will be poking out past the fender. Not sure if you like that look, just want to share my experience with those wheels and W202s
Thanks
#40
Hi Style_Front,
We only have the 801 Brabus style in 18x9.5 as well as the 505 BBS LM style in stock for your consideration.
Please let me know if you would consider either option. They are $549 and shipping is $85
Thanks,
We only have the 801 Brabus style in 18x9.5 as well as the 505 BBS LM style in stock for your consideration.
Please let me know if you would consider either option. They are $549 and shipping is $85
Thanks,