Hi all,

I’m selling a set of 19-inch WORK VS-XX off of my C63.

The wheels are WORK VS-XX in matte gunmetal sized: 19x8.5 +40 fronts and 19x10 +51 rears. PCD is 5x112mm, hubcentric. They should fit most 5x112 bolt patterns, but please check to make sure if they'll fit the car you're putting these on!

The lips came originally as anodized, but I had them powder-coated glossy gray in Tiger Drylac Series 38 Super Durable powder coat. The color code is 38/90016 and is called Argento 312 Metallic, if you want to look that up. I chose this specific powder coat because it's very weather/UV resistant, very durable against road chips, and it is very glossy and smooth.

The tires are Hankook Ventus V12 Evo sized 245/35/19's and 275/30/19's. They have been used, at most, about 5,000 freeway miles--no burn outs, no hard launches, basically Comfort mode driving throughout. The treads are still in excellent shape with more than 6/32 tread left.

Also included are 4 TPMS from Tire Rack already installed and ready to go.

However, please note that the rears do not clear the C63 calipers without running at least 3mm spacers!! Thus, I will throw in a set of H&R 3mm rear spacers for these wheels.

I will also throw in a set of H&R tapered bolts that fit these (and most aftermarket) wheels. These bolts are shaped specifically for wheels that are not Mercedes OEM. The rear bolts are 3mm longer than stock to accommodate the spacers.

Lastly, WORK also sent me a spare lip for one of the rear wheels, just in case something happens to one of them. This is brand new and still in the box. I will, of course, include this as well. So, if you ever scrape or damage one of the lips on your rear wheels, you will have a brand new one ready to go.

Phew.

So, after all that...I'm looking to get $3300 for everything mentioned. Buyer pays for shipping to his/her destination. The wheels, tires, TPMS, bolts, spacers, mount/balance, and powdercoating all cost me close to $6000. Obviously, I'm willing to let these go for much less than that. Paypal preferred, please!!

Thanks!

 

are those wheels on stock suspension?

 

Yes, those are on stock suspension. My car was never lowered. At stock height, with these wheels, there is no rubbing in the rear.

 

Very nice set of wheels.. glws

 

Looks like you are parting out your car.
Are you trading in?

 

:bump for some HOT wheels!

 

Hi, there. Yea, I'm pretty much converting as much of my car back to stock as possible. Trying to trade it in and/or sell it privately. Looking to get into something more "gas friendly."

 

My Work Wheels brother! GLWS!

 

Those are amazing. I'm in Washington and interested but I don't know how soon I can get $3k in cash lol

 

Can we work something out if it's cash? PM me.

 

PM sent.

 

pure sex. my god.

 

I wish these would work for an e55....

 

Previous sale fell through. Price reduced to $3100

 

GLWS bro!!!! amazing wheels, i would have purchased them if i had the money and they are priced well!! ill stick to reps in the time being lol

 

Thanks, bro!!

 

bump

 

Do you know how much the wheels weigh and whether this setup would fit a 2006 e55 ?

 

Hi, there. Do you know what the stock wheels widths and offsets are for the e55? If it's 245/40/18 x 8.5 in front and 265/35/18 x 9.0 in the rear, then the front would fit fine, but the rear would be 12mm closer to the suspension. You may need to run spacers in the rear, but I'm including a set of 3mm spacers plus bolts in this sale. They will both clear the fenders without a problem.

What wheels and tires are you running right now on your current car? I've seen people run 20's in e55's on the forum, so I'm thinking 19's won't be a big deal. It's all about the offset, though.

You can go to this link and play around with the numbers to see if it'll fit: http://www.rimsntires.com/specs.jsp

If you can also measure how far the distance your current wheels is from the calipers, it'll give us a more accurate picture of the fitment.

Also, each wheel plus tire weighs about 55-57 pounds.

 

I believe the w211 e55 factory wheel size & offsets are 18x8.5" et30mm (front) and 18x9.5" et39mm (rear)....So your setup may work with a w211 e55, but would likely require some big spacers...

GLWS!

 

Aaah, no worries. Thank you!

 

bump

 

SOLD!!!

 

nice wheels. I had a set in the same color but polished lips and 17" for my MINI.