MBWorld.org Forums
To get the inner control arms to line up with the body so you can slide the bolt through you'll need to turn the wheel away from the side that you are working on about one full turn.
To get the inner control arms to line up with the body so you can slide the bolt through you'll need to turn the wheel away from the side that you are working on about one full turn.
0 2016/03/03 22:51:04
all done now go have some fun!
all done now go have some fun!
0 2016/03/03 22:53:31
yup they were toast.
yup they were toast.
0 2016/03/03 22:54:06
place jack stands here in the little dip on the arm.
place jack stands here in the little dip on the arm.
0 2016/03/03 22:56:59
Just got a bath
Just got a bath
0 2016/03/31 15:26:22
The rubber bushings on the bottom of the rack. I hope this helps.
The rubber bushings on the bottom of the rack. I hope this helps.
0 2016/04/04 17:46:41
Hold the calipers and use your foot to press the joint in or out. Use a long breaker bar.
Hold the calipers and use your foot to press the joint in or out. Use a long breaker bar.
0 2016/04/30 13:38:00
Bought online works like a charm.
Bought online works like a charm.
0 2016/04/30 13:39:12
Bought from harbor freight tools works great.
Bought from harbor freight tools works great.
0 2016/04/30 13:40:34
Tools you'll need. Also an 8mm for the plastic underbody covers.
Tools you'll need. Also an 8mm for the plastic underbody covers.
0 2016/05/08 15:20:06
Part number.
Part number.
0 2016/05/08 15:20:16
Here's the 4 bolts that come out. Note you'll need an 18mm wrench to hold the nut ontop of the steering linkage assembly to use the gun to secure them. Don't forget to use loctite.
Here's the 4 bolts that come out. Note you'll need an 18mm wrench to hold the nut ontop of the steering linkage assembly to use the gun to secure them. Don't forget to use loctite.
0 2016/05/08 15:20:38
Here's the bushing once the bolt has been removed.
Here's the bushing once the bolt has been removed.
0 2016/05/08 15:20:49
Here's one of the upper bushings. You'll have about 3 inches of clearance to pull them out.
Here's one of the upper bushings. You'll have about 3 inches of clearance to pull them out.
0 2016/05/08 15:21:02
After the bushings are removed wipe down the metal where they seat before putting the new bushings in.
After the bushings are removed wipe down the metal where they seat before putting the new bushings in.
0 2016/05/08 15:21:14
I used vise grips to pull them out it worked like a charm. There is a rubber piece jutting out of the bushing line it up with the groove in the steering rack and press it into place snugly before putting the bolt back in and tightening it down.
I used vise grips to pull them out it worked like a charm. There is a rubber piece jutting out of the bushing line it up with the groove in the steering rack and press it into place snugly before putting the bolt back in and tightening it down.
0 2016/05/08 15:21:26
How to remove and press in the lower ball joints if you need to fo them. It wasn't hard.
How to remove and press in the lower ball joints if you need to fo them. It wasn't hard.
0 2016/05/10 11:56:14
Very easy just screw the three bolts on top and the lower bolt in on the bottom. Don't forget to use loctite.
Very easy just screw the three bolts on top and the lower bolt in on the bottom. Don't forget to use loctite.
0 2016/05/12 09:57:17
0 2016/05/12 09:59:37
Use a ball joint separator instead of a pickle fork. Also probably better to take off the tire and check your other joints to see what else may need to be changed.
Use a ball joint separator instead of a pickle fork. Also probably better to take off the tire and check your other joints to see what else may need to be changed.
0 2016/05/12 10:00:28
0 2017/05/30 16:38:35
0 2017/05/31 17:45:53
0 2017/06/02 14:33:27
0 2017/06/23 13:37:24
0 2017/06/23 13:37:29
0 2017/06/23 13:37:35
0 2017/06/23 16:14:49
0 2017/06/23 16:15:00
0 2017/07/01 18:27:27
0 2018/03/21 19:45:38
0 2018/03/21 19:45:38
0 2018/03/21 19:45:38
you will need a full set of Torx bits male and female.
you will need a full set of Torx bits male and female.
0 2018/03/21 19:47:31
Sizes of the sockets.
Sizes of the sockets.
0 2018/03/21 19:47:31
0 2018/03/21 19:49:48
0 2018/03/21 19:50:17
0 2018/03/21 19:51:16
0 2018/03/21 19:51:17
0 2018/03/21 19:51:17
0 2018/03/21 19:52:28