MBWorld.org Forums
0 2018/03/21 20:10:08
0 2018/03/21 20:10:08
0 2018/03/21 20:10:09
removing the bolt behind the tension pulley requires you to use a 17mm wrench to pull tension on the pulley to get to the screw. There are 4 screws holding the pulley on remove all 4.
removing the bolt behind the tension pulley requires you to use a 17mm wrench to pull tension on the pulley to get to the screw. There are 4 screws holding the pulley on remove all 4.
0 2018/03/21 20:13:52
Here is where the radiator fluid was weeping out of the weep hole it is right above the large radiator hose so it can make it appear like the hose is leaking.
Here is where the radiator fluid was weeping out of the weep hole it is right above the large radiator hose so it can make it appear like the hose is leaking.
0 2018/03/21 20:13:52
Here is another portion of the belt wrap kit that needs to be removed.
Here is another portion of the belt wrap kit that needs to be removed.
0 2018/03/21 20:13:53
Here is another holding the water pump to the block. You will need to remove the black pulley to see this bolt.
Here is another holding the water pump to the block. You will need to remove the black pulley to see this bolt.
0 2018/03/21 20:13:54
Here is a bolt holding the water pump to the block.
Here is a bolt holding the water pump to the block.
0 2018/03/21 20:13:54
Another bolt I believe this one holds the supercharger tension pulley on.
Another bolt I believe this one holds the supercharger tension pulley on.
0 2018/03/21 20:13:54
0 2018/03/21 20:13:55
Another bolt uncovered once the black pulley was removed.
Another bolt uncovered once the black pulley was removed.
0 2018/03/21 20:13:55
0 2018/03/21 20:13:55
There are 7 bolts that need to be removed from the drivers side lower portion of the water pump. FYI the upper left and right bolts are different and will need to be put back in the proper place so take pictures.
There are 7 bolts that need to be removed from the drivers side lower portion of the water pump. FYI the upper left and right bolts are different and will need to be put back in the proper place so take pictures.
0 2018/03/21 20:13:55
Another bolt location.
Another bolt location.
0 2018/03/21 20:13:56
remove the large radiator hose. Mine was an 8mm socket.
remove the large radiator hose. Mine was an 8mm socket.
0 2018/03/21 20:13:56
0 2018/03/21 20:13:56
Remove the alternator upper bolt.
Remove the alternator upper bolt.
0 2018/03/21 20:13:56
remove the radiator hose. Mine was an 8mm socket.
remove the radiator hose. Mine was an 8mm socket.
0 2018/03/21 20:13:56
Remove the smaller radiator hose mine was a 7mm socket. You can also see the weep hole in this picture clearly full of radiator fluid.
Remove the smaller radiator hose mine was a 7mm socket. You can also see the weep hole in this picture clearly full of radiator fluid.
0 2018/03/21 20:13:56
you will need to remove the 4 bolts holding the black pulley onto the motor. I used a 10mm wrench , I was able to hold the pulley with one hand while wrenching with the other to break the bolts lose.
you will need to remove the 4 bolts holding the black pulley onto the motor. I used a 10mm wrench , I was able to hold the pulley with one hand while wrenching with the other to break the bolts lose.
0 2018/03/21 20:13:56
0 2018/03/21 20:27:12
0 2018/03/21 20:27:13
0 2018/03/21 20:27:14
0 2018/03/21 20:27:14
0 2018/03/21 20:27:14
0 2018/03/21 20:27:15
0 2018/03/21 20:27:16
0 2018/03/21 20:27:16
0 2018/03/21 20:27:17
0 2018/03/21 20:27:17
0 2018/03/21 20:27:17
0 2018/03/21 20:27:17
0 2018/03/21 20:27:17
0 2018/03/21 20:27:18
0 2018/03/21 20:27:18
0 2018/03/21 20:27:18
0 2018/03/21 20:27:18
0 2018/03/21 20:27:19
0 2018/03/21 20:27:19
0 2018/03/21 20:27:19