Reset Service light
#1
MBWorld Fanatic!
Thread Starter
Reseting Service Light on 05+ W203
Hey guys,
I always do my own servicing because i dislike taking the car to the stealer, but now i need to figure out how to remove the Service A, B etc Light in my dash.
Anybody know of a quick walk-through? i ran a search but only found how to do it on the ML.
Any help would be greatly appreciated!!
\m/
-Danny
I always do my own servicing because i dislike taking the car to the stealer, but now i need to figure out how to remove the Service A, B etc Light in my dash.
Anybody know of a quick walk-through? i ran a search but only found how to do it on the ML.
Any help would be greatly appreciated!!
\m/
-Danny
#2
Super Member
Join Date: Feb 2005
Location: Edmonds... good bye SD
Posts: 806
Likes: 0
Received 2 Likes
on
2 Posts
i know there is quite a write up on it in the manual...
I think you just go to the screen and hold in the reset dial for a few seconds, I read it once, but never tried it... then you can adjust it to 10,000 12,000 15,000 etc.
I think you just go to the screen and hold in the reset dial for a few seconds, I read it once, but never tried it... then you can adjust it to 10,000 12,000 15,000 etc.
#3
MBWorld Fanatic!
Thread Starter
Originally Posted by Justinius7
i know there is quite a write up on it in the manual...
I think you just go to the screen and hold in the reset dial for a few seconds, I read it once, but never tried it... then you can adjust it to 10,000 12,000 15,000 etc.
I think you just go to the screen and hold in the reset dial for a few seconds, I read it once, but never tried it... then you can adjust it to 10,000 12,000 15,000 etc.
Anybody know exactly how to do this?
#5
MBWorld Fanatic!
Thread Starter
Originally Posted by wingless
Ignition on, but not running.
Remaining miles to service displayed.
Press and hold the dash reset pushbutton.
Remaining miles to service displayed.
Press and hold the dash reset pushbutton.
Last edited by Sauceboy01; 12-07-2005 at 05:40 PM.
#6
Junior Member
Join Date: Aug 2004
Location: Boston
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 SS
How to reset AFTER service date has been exceeded
Does anybody know how to reset the service light AFTER the date has been passed? as in... "Service A is exceeded by 100 days"
I've tried a couple of things and it doesn't work...
I've tried a couple of things and it doesn't work...
Trending Topics
#8
Super Member
Join Date: Aug 2004
Location: Augusta, GA
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
'05 SS Brillant Silver
Originally Posted by wingless
Ignition on, but not running.
Remaining miles to service displayed.
Press and hold the dash reset pushbutton.
Remaining miles to service displayed.
Press and hold the dash reset pushbutton.
#9
Junior Member
Join Date: Aug 2004
Location: Boston
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 SS
this didn't work for me. i turned the key to ON position and when the message about "service A has been exceeded by 100 days" appeared i pressed the odometer reset button. it disappeared after a second but still comes up everytime i start the car.
am i doing something wrong here?
am i doing something wrong here?
#10
Super Member
Join Date: Aug 2004
Location: Augusta, GA
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
'05 SS Brillant Silver
Originally Posted by Aurora
this didn't work for me. i turned the key to ON position and when the message about "service A has been exceeded by 100 days" appeared i pressed the odometer reset button. it disappeared after a second but still comes up everytime i start the car.
am i doing something wrong here?
am i doing something wrong here?
#14
Member
Join Date: Jan 2005
Location: Orange County, CA
Posts: 178
Received 20 Likes
on
14 Posts
GLA250 4Matic, 911 Carrera S, R1250 GS Adv.
The procedure described doesn't seem to work for me either ('05 C230K, 5K mi., 25 days past due for first A Service).
I didn't have time to try every combination of menus, door open/closed, engine start/no start, etc., but I did try to understand the Owner's Manual on this subject. It says to take it to the dealer or have your non-dealer tech somehow get it from his M-B service info.
If this really can be done by the owner, then there must be some more steps to the procedure.
From the above posts, it's not clear whether the procedure is supposed to work with the 05's. Has anyone done it? If so, how?
I didn't have time to try every combination of menus, door open/closed, engine start/no start, etc., but I did try to understand the Owner's Manual on this subject. It says to take it to the dealer or have your non-dealer tech somehow get it from his M-B service info.
If this really can be done by the owner, then there must be some more steps to the procedure.
From the above posts, it's not clear whether the procedure is supposed to work with the 05's. Has anyone done it? If so, how?
#15
Almost a Member!
Join Date: Jan 2003
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
07 C230 SS Black/Black
I reset my 2005 Service A reminder last month folowing the intruction from a post posted by kjb55 and it worked for me. I was 30 days late.
1. Ignition key in position 2.
2. Use the page button to select odometer readout in cluster.
3. Use the scroll button to display FSS indicator.
4. Press 'R' button on cluster for approximately 2 seconds.
5. Display in cluster will advise "to reset service reminder - press 'R' button for approx. 3 seconds.
6. Press 'R' button on cluster for approximately 3 seconds.
7. Service reminder is reset.
1. Ignition key in position 2.
2. Use the page button to select odometer readout in cluster.
3. Use the scroll button to display FSS indicator.
4. Press 'R' button on cluster for approximately 2 seconds.
5. Display in cluster will advise "to reset service reminder - press 'R' button for approx. 3 seconds.
6. Press 'R' button on cluster for approximately 3 seconds.
7. Service reminder is reset.
#18
Banned
Join Date: Jun 2003
Location: Valencia, CA
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
C230 SS
Same here unable to reset.
Same here, I have a 2003 C230 Sport Sedan with overdue service, actually got to Service B overdue. After my friend did the service for me, I tried what the manual said to do, and now it froze at overdue Service B by 2900 miles.
#19
Banned
Join Date: Jun 2003
Location: Valencia, CA
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
C230 SS
Retried to reset my service light, that says Service B overdue by 2900 miles, and it works!! Just turn ignition to position 2, and held the reset button after selecting the service screen, it will prompt if you want it reset, and press the button again. I have a 2003 C230 SS.
#21
Super Member
Join Date: Jul 2006
Location: Markham, Canada
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
C320 Coupe
dang, i felt stupid to bring my car to dealer last month for service for 500 bucks... if i would've known this method i definately avoid the dealer =/
#22
Super Member
Join Date: Mar 2005
Location: Southern Methodist University
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
2001 C320 (purple), 2002 BMW 540i
sweet, this helps me out a BUNDLE!
Now then, if only I could figure out how to replace those spark plugs on my own... but I can't even seem to get the engine cover off. Oh well, looks like I'm going to be STFF this morning...
Now then, if only I could figure out how to replace those spark plugs on my own... but I can't even seem to get the engine cover off. Oh well, looks like I'm going to be STFF this morning...
#23
Super Member
Join Date: Nov 2005
Location: N.Y
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
BMW 135i
Originally Posted by powa
dang, i felt stupid to bring my car to dealer last month for service for 500 bucks... if i would've known this method i definately avoid the dealer =/
same here just did my B service 2days ago for 500 bucks
#25
It worked for me with a 2006 C230! Thank you so much!
You would need to turn the Ignition key in Position 2, and make sure your display is at the "Service" page, and press + hold the RESET when the screen ask you to do so.
Thank you again!
You would need to turn the Ignition key in Position 2, and make sure your display is at the "Service" page, and press + hold the RESET when the screen ask you to do so.
Thank you again!