New HID's
04-11-2009, 01:05 AM
#1
Senior Member
Thread Starter
New HID's
Got my new HID's from http://www.vvme.com/catalog/list-s-10145-10146.html which only cost me $60ish shipped!!!! 5 Min install and great looking lights! No error messages or flickering at all!
Lights are 6000k
My city and side marker lights are clear/blue from hoen
My fogs are stock for now
Lights are 6000k
My city and side marker lights are clear/blue from hoen
My fogs are stock for now
04-11-2009, 02:05 AM
#2
MBWorld Fanatic!
Join Date: Jul 2007
Location: Livingston, California.
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
2002 c32 AMG 2012 c250 Coupe
big diffrence from stock halogens huh.. you should get your fogs too, you will be able to see a deer crossing from 100 miles away.. i have matching 6000k headlights and fogs, man it is freagin bright..! looks clean though.. 
keep the mods coming..
keep the mods coming..
04-11-2009, 02:36 AM
#3
Member
Join Date: Jun 2008
Location: Arizona
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
1999 Civic Hatchback, 2002 c240, 2003 CLK 500
how is there no error or flickering with a 35watt setup? i am planning on buying a set but everywhere i read on here they say to get the 55w.
04-11-2009, 04:44 AM
#4
MBWorld Fanatic!
Join Date: Jul 2007
Location: Livingston, California.
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
2002 c32 AMG 2012 c250 Coupe
im guessing for your headlights you eighther get your car switched to XENON PRESENT using the star das computer, or you can buy the hid set that comes with the built in resistors..
04-11-2009, 03:58 PM
#6
Senior Member
Thread Starter
I wasn't sure about the error messages either but these said they were plug and play. And thats exactly what they are. no wiring done on my own. Did NOT have to go get xenon=present, just opened the box and plugged in the lights. 35w with no errors!
04-11-2009, 03:59 PM
#7
Senior Member
Thread Starter
O and yes i plan on gettin the HID fogs/high beams i just wanted to test the quality of these lights first before buying all 3 at once.
Trending Topics
04-11-2009, 07:56 PM
#9
Senior Member
Join Date: Nov 2008
Location: Tampa/Lutz, FL.
Posts: 475
Likes: 0
Received 1 Like
on
1 Post
Correction, Drove An '05 C230 Kompressor SS
I really want the 5000K for the extra $15, But I'm still a little Skeptical of the Flickering and code issues, How are these kits so Cheap yet work perfectly on out W203s???
Can you post more pics of your kit?
Thanks!!!
Can you post more pics of your kit?
Thanks!!!
04-12-2009, 02:10 PM
#14
Senior Member
Thread Starter
Sorry for some reason they keep coming out blurry up close, here is the driver side headlight kit
The yellow and brown wires are from the stock headlamp for the H7 blubs
This is the entire kit from a far
The yellow and brown wires are from the stock headlamp for the H7 blubs
This is the entire kit from a far
04-12-2009, 05:20 PM
#16
Out Of Control!!
Join Date: Nov 2005
Location: OC
Posts: 18,677
Likes: 0
Received 9 Likes
on
9 Posts
a quarter mile at a time
did you just leave the dust cap off?????????
I don't know what's going on with your car but these kits WILL throw an error if used for the fog lights without error cancelers, resitors or capacitors.
I don't know what's going on with your car but these kits WILL throw an error if used for the fog lights without error cancelers, resitors or capacitors.
04-12-2009, 06:51 PM
#18
Out Of Control!!
Join Date: Nov 2005
Location: OC
Posts: 18,677
Likes: 0
Received 9 Likes
on
9 Posts
a quarter mile at a time
sure, if you want moisture, dust, and other debris all over the inside of your headlamp housing.
Not to mention the possibility of a short or other electrical problems because the H7 connector (as seen in pic) uses a bare prong that's just slightly exposed.
I highly recommend drilling a 1" hole on the back of the dust guard and using the supplied grommet.
Not to mention the possibility of a short or other electrical problems because the H7 connector (as seen in pic) uses a bare prong that's just slightly exposed.
I highly recommend drilling a 1" hole on the back of the dust guard and using the supplied grommet.
04-12-2009, 06:59 PM
#19
Senior Member
Thread Starter
No the cap is on, didn't have the dust cap in when i installed them bc i wanted to see if i was gonna get error messages or not. They are the single beam kits
I will be gettin the fogs/ high beams eventually but im gettin my CL style grille next. Don't really need the highs yet since not many pple see me drive with them lol
I will be gettin the fogs/ high beams eventually but im gettin my CL style grille next. Don't really need the highs yet since not many pple see me drive with them lol
04-13-2009, 06:13 PM
#21
MBWorld Fanatic!
Will I get an error because They have the Bi-Xenon for 72.99 which I think is a good price.
I hope down the line I dont get any errors or flickering.
Edit
What a wierd site they also sell Tatoo Kits looool
I dont know I hope these are the real deal.
I hope down the line I dont get any errors or flickering.
Edit
What a wierd site they also sell Tatoo Kits looool
I dont know I hope these are the real deal.
Last edited by W203E35; 04-13-2009 at 06:16 PM.
04-13-2009, 06:31 PM
#22
Senior Member
Thread Starter
No before this kit i had stock halogens, and these work perfect, i wasn't sure at first but another member on here said he had me on 2 cars for 2 years and didn't have a problem
04-13-2009, 11:01 PM
#23
Member
Join Date: Feb 2009
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
CLC Coupe
That is a good news!!! I have ordered the H7 & H11 from them too. Cant wait for the parts to arrive!!! Mine is the CLC coupe model.
