***Official Wheel/tire/stance Fitment Thread***
thanks for the help
Harold
The Best of Mercedes & AMG
Wheel: Gloss Black w/ Mirror Finish Lip Mandrus Millennium
Size: 19"
Width: Front-8.5"
Rear-9.5"
Offset: ET25 all around
Tire Make: Falken 452
Tire Size: Front-235/35/19
Rear-265/30/19
No Spacers or camber kit
Suspension: Eibach Pro Kit (1.2" drop all around)
Spring Pad #1
Angelo
Last edited by Newjd2; Jun 7, 2011 at 01:32 PM.







Monarch EURO 63 RS
19x8.5 32mm offset - 3mm spacers = 29mm
19x9.5 35mm offset
225/35/19 Toyo FZ4
255/35/19 Bridgestone Potenza RE050
some generic 3mm spacers on the front. This was to give the shock a little bit more room and also the bolts I had were a bit too long so that allowed me to use them.
Lowered with Bilstein PSS9 Coilovers
No camber kit for now
Before mounting place the bolts in to the wheels and measure the part sticking out. For me the thread sticking out is 5/8" (16mm) both front and back. Any longer and I would not be able to tighten up the front and in the rear I was hitting the E-break with the knocking sound.
I think I could also lower a bit more but the look is fine now and do not want to deal with potencial rubbing issues. I might drop the front by another 1/2 inch and will try to add 10mm spacers in the rear.
Last edited by dariusf; Jun 7, 2011 at 03:26 PM.
I would prefer not to use spacers if I do not have to.
I am looking for an 18 8.5/9.5 setup.
Last edited by woogs; Jun 11, 2011 at 10:58 AM.
I have a 2011 W212 / E350.
I am contemplating running...
Front - 20x9 ET 43 Tires - 245/30/20
Rear - 20x10.5 ET 48 Tires - 285/25/20
Looking for a classic/aggresive stance. I have no qualms about using spacers.
Yay or Nay?




You probbaly would have better luck searching in the 212 forum or creating a thread there and asking your questions. Good luck.
Here are the wheels: http://www.oewheelsllc.com/Wheels-fo...52695-2-1.html
Here are the tires: http://www.discounttiredirect.com/di...tus+V4+ES+H105
4 new wheels and 4 new 50,000 mile Hankooks
I LOVE it!
Here is the car:

Last edited by JHouse; Jun 28, 2011 at 11:21 AM.











