c250 cgi tuning
#1
Newbie
Thread Starter
c250 cgi tuning
c 250 cgi coupe turbo/water to air cooler uprade
m 271 turbo upgrade
c250 cgi coupe turbo/water to air cooler upgrade
hello
i just want to share some photo and get some idea for my Project
1.i buy mishimoto oil cooler but how can install it because oil filter little complicated
2.did some one use nitrous in this car?
3.how much hp can handle stock engine (conn roads ,pistons,bolts vs )
Last edited by mf245; 08-05-2016 at 06:41 PM.
The following users liked this post:
HaitianG (01-18-2023)
#2
that's amazing, nobody has done it that far yet.. you would be one of the first. There is no real tune available for our engine yet because the Siemens Continental ECU cannot be hacked easily. You would need to use piggy back that can adjust more fuel but you will never be able to use all that turbo power with stock ecu
The following users liked this post:
mf245 (09-07-2016)
#4
We doing an ecu... for our race c250 for Pirelli World Challenge so far I have a piggyback ECU that made 238whp couldn't make any more with the stock turbo charger we are changing turbocharger now should make 282 to 300 at the wheels
The following users liked this post:
mf245 (09-07-2016)
#5
Newbie
Thread Starter
you can please give some more information about your piggyback ecu ? i drive my car for Daily use your ecu can support all electronic devices in car ?
#6
238whp? I don't want to call bs, but have any evidence? What other mods? And what piggyback ecu?
Trending Topics
#8
It is impossible to get that much power from original turbo..
#9
c 250 cgi coupe turbo/water to air cooler uprade
m 271 turbo upgrade
c250 cgi coupe turbo/water to air cooler upgrade
hello
i just want to share some photo and get some idea for my Project
1.i buy mishimoto oil cooler but how can install it because oil filter little complicated
2.did some one use nitrous in this car?
3.how much hp can handle stock engine (conn roads ,pistons,bolts vs )
vath intercooler and exhaust systems downpipe and lsd..
this engine is really strong and can handle more %50 power but if you drive it everyday pistons needed to be upgraded with roads and bolts..
but if you use methanol kit and oil cooler it helps a lot..i will test my car after turbi upgrade i will let you know my experince
#10
i am getting my c250 turbo upgrade
vath intercooler and exhaust systems downpipe and lsd..
this engine is really strong and can handle more %50 power but if you drive it everyday pistons needed to be upgraded with roads and bolts..
but if you use methanol kit and oil cooler it helps a lot..i will test my car after turbi upgrade i will let you know my experince
vath intercooler and exhaust systems downpipe and lsd..
this engine is really strong and can handle more %50 power but if you drive it everyday pistons needed to be upgraded with roads and bolts..
but if you use methanol kit and oil cooler it helps a lot..i will test my car after turbi upgrade i will let you know my experince
The following users liked this post:
ecmexchange (12-05-2017)
#12
Looking fantastic!