When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
just looking for opinions.
White 2012 c250
looking to do my first mod and replace the side markers since one of the bulbs is out anyway.
I was was looking at the smoked vs clear vs led vs regular bulb. Also at white or yellow.
What at do you guys think looks the best on the white car?
Im also going to be upgrading the halogens to either HID or LED. I miss having the HID’s like my last car. I don’t have the projector lenses so I know you guys must have preferred venders etc.... any help is greatly appreciated.
just looking for opinions.
White 2012 c250
looking to do my first mod and replace the side markers since one of the bulbs is out anyway.
I was was looking at the smoked vs clear vs led vs regular bulb. Also at white or yellow.
What at do you guys think looks the best on the white car?
Im also going to be upgrading the halogens to either HID or LED. I miss having the HID’s like my last car. I don’t have the projector lenses so I know you guys must have preferred venders etc.... any help is greatly appreciated.
Clear markers with white LEDs. And HIDs over LEDs for low beams in those housing for better results
Are the headlights an actual full assembly or a bulb swap?
any vendors you guys have good luck with?
An HID conversion kit using your existing housing. Fairly easy DIY. Functionally plug and play. We carry top end Morimoto H7 conversion kits if interested. We also have 194 wedew leds for your markers. All of our products are canbus enabled so error free.
An HID conversion kit using your existing housing. Fairly easy DIY. Functionally plug and play. We carry top end Morimoto H7 conversion kits if interested. We also have 194 wedew leds for your markers. All of our products are canbus enabled so error free.
dont I need projectors in the housing for the HID?
dont I need projectors in the housing for the HID?
Ideally yes to help focus the beam and we have projector retrofit kits available. However with the c204 reflector design don't really have a huge glare problem. You won't have a crisp cutoff, but not the huge glare issue you see in older reflectors either.
Ideally yes to help focus the beam and we have projector retrofit kits available. However with the c204 reflector design don't really have a huge glare problem. You won't have a crisp cutoff, but not the huge glare issue you see in older reflectors either.
it doesn’t have projectors in it at all. Just a regular halogen headlight housing
A retrofit project is more involved and I wouldn't classify as an entry level DIY project. You have to bake open your housing to be able to screw in the projectors. I'd recommend getting a shop to do it for you. An HID conversion though is a DIY project as you're just plugging everything into existing housing/wiring.
A retrofit project is more involved and I wouldn't classify as an entry level DIY project. You have to bake open your housing to be able to screw in the projectors. I'd recommend getting a shop to do it for you. An HID conversion though is a DIY project as you're just plugging everything into existing housing/wiring.
thanks for all the help. Which kit would I get minus the projector?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
