Intake opinions?
03-22-2005, 08:43 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
C230K
03-23-2005, 07:45 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2002
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
C230K
I ordered one too. It doesnt look that hard to install. I would have to think there there should be some HP gain. On a forced induction car I would think the faster you can get air in the better.
03-26-2005, 09:19 PM
#4
Junior Member
Join Date: Dec 2001
Location: Toronto, Canada
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
1999 C230 Kompressor, 2002 E320 4matic
So you both bought that kit off ebay huh?.. well take some pics when you get it and of it installed too.. Im interested to see what it looks like and you'll have to let us know how it sounds!!
Im have almost completed my intake for my M111 powered W202... just have to pick up a couple more items and installation should be this week sometime.
your kit is very basic but Im sure effective... I have gone that exra step and replaced the whole intake from the airbox to the back of the supercharger... all aluminium pipe all the way back.. with my K&N filter mounted behind the bumper..
thants something you should think of.. making some sort of heatshield for the air filter since its directly in the engine bay.
keep us posted..
Im have almost completed my intake for my M111 powered W202... just have to pick up a couple more items and installation should be this week sometime.
your kit is very basic but Im sure effective... I have gone that exra step and replaced the whole intake from the airbox to the back of the supercharger... all aluminium pipe all the way back.. with my K&N filter mounted behind the bumper..
thants something you should think of.. making some sort of heatshield for the air filter since its directly in the engine bay.
keep us posted..
03-27-2005, 04:51 PM
#5
Member
Join Date: Aug 2004
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
I plan to extend the tubing and put the cone filter in the bumper
maybe extend also the bypass valve cone filter to get in the bumper, because I think the engine thates his air from there when SC is not spinning.
I placed a sound clip on benzworld of a M111 R170 with a custom intake and it sounds really loud... and the bypass was purged in the intake, so I bet this one will be loud.
Etienne
maybe extend also the bypass valve cone filter to get in the bumper, because I think the engine thates his air from there when SC is not spinning.
I placed a sound clip on benzworld of a M111 R170 with a custom intake and it sounds really loud... and the bypass was purged in the intake, so I bet this one will be loud.
Etienne
03-27-2005, 05:55 PM
#6
Super Member
Join Date: Apr 2003
Location: Wash., D.C.
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
C280
Originally Posted by MrSpace
I plan to extend the tubing and put the cone filter in the bumper
maybe extend also the bypass valve cone filter to get in the bumper, because I think the engine thates his air from there when SC is not spinning.
I placed a sound clip on benzworld of a M111 R170 with a custom intake and it sounds really loud... and the bypass was purged in the intake, so I bet this one will be loud.
Etienne
maybe extend also the bypass valve cone filter to get in the bumper, because I think the engine thates his air from there when SC is not spinning.
I placed a sound clip on benzworld of a M111 R170 with a custom intake and it sounds really loud... and the bypass was purged in the intake, so I bet this one will be loud.
Etienne
03-27-2005, 06:59 PM
#7
Member
Join Date: Oct 2004
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
2000 C280 Sport (W202)
Originally Posted by C280Sportster
Anything for the V6 motor out there? I was thinking about a dual one like the C43 (and S55) has. Imagine that feeding 2 K/Ns!
before and after pics...
Trending Topics
03-28-2005, 12:53 AM
#10
Member
Join Date: Oct 2004
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
2000 C280 Sport (W202)
Thanks alot you guys the tube that splits the single intake into two is actually a rubber plumbing connector that has been cut down...you can find it at your local hardware store just make sure you get the rubber and not the PVC (obviously) as far as the small cones go, they are called "breathers" they help distribute the air that is being drawn in from the two intake tubes so your not only drawing air from the bottom main cones but also from the top of the engine through the breathers...As far as Ashkans question goes i'm not sure how much hp i gained exactly but my car does do better when i hit high rpm's before the car would hesitate when you would be in 3rd @ 6,000rpm it would shut down but now i can hit 6,500rpm and not have the car cut the gas out, it also runs much cooler than normal...before it would stay at 80-83*C but now it runs 76-80*C...and it sounds alot louder than stock too! 
expirament and have fun thats how i got my ideas...i'll keep posting...right now im trying to find out if i can fit 2001 SL500 projectors on our W202's i'll keep ya posted...and if you have any ideas please share!!
the tube that splits the single intake into two is actually a rubber plumbing connector that has been cut down...you can find it at your local hardware store just make sure you get the rubber and not the PVC (obviously) as far as the small cones go, they are called "breathers" they help distribute the air that is being drawn in from the two intake tubes so your not only drawing air from the bottom main cones but also from the top of the engine through the breathers...As far as Ashkans question goes i'm not sure how much hp i gained exactly but my car does do better when i hit high rpm's before the car would hesitate when you would be in 3rd @ 6,000rpm it would shut down but now i can hit 6,500rpm and not have the car cut the gas out, it also runs much cooler than normal...before it would stay at 80-83*C but now it runs 76-80*C...and it sounds alot louder than stock too! expirament and have fun thats how i got my ideas...i'll keep posting...right now im trying to find out if i can fit 2001 SL500 projectors on our W202's i'll keep ya posted...and if you have any ideas please share!!
03-28-2005, 12:57 AM
#11
Member
Join Date: Oct 2004
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
2000 C280 Sport (W202)
Oh yea! and i still have the ram air tube you see in the first picture...it is connected to the cone on the left in the top pic and it runs down to the right vent in the bottom of the bumper...kinda gives it a "forced induction" i still cant find a place to run a second tube to the second cone without hitting the belt drive 
03-28-2005, 01:23 AM
#12
Super Member
Join Date: May 2002
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
I had an intake like that on my 320 clk for about 4 years so far, I made it out of a honda accord one. It just makes the car alot more louder, and I like it. I have had no maf problems, but i also dont over oil my filters. I dont believe it adds much hp but it sounds great.
On the compressor engine, I used to have a c230k coupe, you will need to do something about the bypass valve. Air gets sucked in and exhausted through there depending on throttle input. It sounds like a big electric drill
On the compressor engine, I used to have a c230k coupe, you will need to do something about the bypass valve. Air gets sucked in and exhausted through there depending on throttle input. It sounds like a big electric drill
03-29-2005, 09:00 AM
#13
Junior Member
Thread Starter
Join Date: Aug 2002
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
C230K
Originally Posted by MrSpace
I plan to extend the tubing and put the cone filter in the bumper
maybe extend also the bypass valve cone filter to get in the bumper, because I think the engine thates his air from there when SC is not spinning.
I placed a sound clip on benzworld of a M111 R170 with a custom intake and it sounds really loud... and the bypass was purged in the intake, so I bet this one will be loud.
Etienne
maybe extend also the bypass valve cone filter to get in the bumper, because I think the engine thates his air from there when SC is not spinning.
I placed a sound clip on benzworld of a M111 R170 with a custom intake and it sounds really loud... and the bypass was purged in the intake, so I bet this one will be loud.
Etienne
Did you accually get yours yet or are you still fighting this guy over pay pal? Got a clip the that vid of your intake/blow off? Id love to see it.
03-29-2005, 11:50 AM
#14
Almost a Member!
Join Date: Jul 2003
Location: Chicopee, Ma
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
199 C280
You can buy the AMG dual intake kit from Germany
Originally Posted by grkpmpn69
I have a dual feed intake and it doesnt have that much more power than a single feed...probablly nothing! But it looks cool as hell :v Mine is a C280 sport with the 2.8 V-6...here's some pics if you care to see before and after pics...
before and after pics...
03-29-2005, 11:52 AM
#15
Almost a Member!
Join Date: Jul 2003
Location: Chicopee, Ma
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
199 C280
aLSO eBay Procarparts.com has a K&N kit for the V6
Originally Posted by C280Sportster
Anything for the V6 motor out there? I was thinking about a dual one like the C43 (and S55) has. Imagine that feeding 2 K/Ns!
03-29-2005, 11:17 PM
#16
Member
Join Date: Aug 2004
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fixn2xlr8
Did you accually get yours yet or are you still fighting this guy over pay pal? Got a clip the that vid of your intake/blow off? Id love to see it.
http://www.teaminstyle.com/slkstart-up.wav
http://www.teaminstyle.com/slkrevup.wav
It's for a setup where the bypass was connected on the intake tube, on an SLK230
Etienne
03-30-2005, 11:36 AM
#17
Junior Member
Thread Starter
Join Date: Aug 2002
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
C230K
Originally Posted by MrSpace
yes it is finally in the mail I have the tracking number. I was about to become mad at all this story.
http://www.teaminstyle.com/slkstart-up.wav
http://www.teaminstyle.com/slkrevup.wav
It's for a setup where the bypass was connected on the intake tube, on an SLK230
Etienne
http://www.teaminstyle.com/slkstart-up.wav
http://www.teaminstyle.com/slkrevup.wav
It's for a setup where the bypass was connected on the intake tube, on an SLK230
Etienne
Well thats great, Im really looking forward to getting mine too. I read your thread and send a bank check through U.S. Mail to keep the confusion down so I should be getting it here soon. Let us know how the instal goes. Pics would be wonderful too.
04-06-2005, 08:34 PM
#18
Junior Member
Thread Starter
Join Date: Aug 2002
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
C230K
MrSpace - I was just wondering if you got your intake and if you might have had a chance to install it. Mine should be on the way and I was just looking for feedback. thx.
Jon
Jon
04-06-2005, 11:08 PM
#19
Member
Join Date: Aug 2004
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
yeah it's arrived, but I'm only getting it next weekend (16th)... because I'm shipping the stock in the US
I have a bunch to install (spacers, intake, headers, body kit, exhaust, etc)
Etienne
I have a bunch to install (spacers, intake, headers, body kit, exhaust, etc)
Etienne
04-17-2005, 10:36 PM
#20
Junior Member
Thread Starter
Join Date: Aug 2002
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
C230K
Ok, well. I got the intake in the mail Saturday. The intake portion of it looks run of the mill (something you could buy from just about any speed shop local. The bit that mounts on to the bypass valve is a real work of art if it fits correctly. I have yet to have the time to grab up a friend of mine and accually install it. I can take pics if someone wants to host and post em.
04-19-2005, 02:55 AM
#22
Senior Member
Join Date: Jun 2003
Location: San Gabriel, Ca
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
UCF21
i have one installed. its really loud. you dont get the intake sound that you get when u install intake on a regular car at all. it makes the supercharger whine pretty damn loud and it has that blow off valve wanna be sound when u let off the gas at high rpms. sounds pretty cool and intimidating.
04-19-2005, 06:04 AM
#24
Senior Member
Join Date: Jun 2003
Location: San Gabriel, Ca
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
UCF21
it came with brackets but i havent got to mounting it yet. i lost my drill. for now i guess its moving around in there but it seems pretty stiff.. the bypass thingy is pretty damn flimsy though and ive yet to find a solution.
